S&S Precision SlingClip
Shooting with a One-Point sling is certainly very comfortable, but when it’s time to sling the weapon system having a Two-Points really makes everything easier. This accessory allows to quickly change your configuration without having to handle any QD or clip interface. S&S Precision has had for a long time another similar product but this really seems slick and low-profile.
It is designed to fit most standard 1” slings and it effectively turns your single point sling into a two point sling with a simple flick of your thumb.
Specs and Features:
-6061 Aluminum
-New low-profile design
-Skeletonized design with fewer components
-Integrated hand stop/finger groove design
-Works in cojunction with single point sling systems (1” width) to secure weapon
-KeyMod & M-LOK versions available
BCM | 300 Blackout

Bravo Company Manufacturing has released a full line of 300 Blackout carbines and upper receivers. With this latest addition, BCM has officially entered the 300 blk segment of the firearm industry. The many similarities in the components of the weapon platform between .223 (or 5.56) and 300 Blackout allow an easy and cost effective caliber conversion.
In the past few years we have seen many other companies entering the 300 Blk market; we are very glad to see one of the best firearms manufacturer following the same steps. BCM will be offering the 300 Blackout upper receiver in 16″ RECCE, 12.5″ CQB and 10″ Pistol lengths.
Approved by SAAMI on 17 January, 2011, Supersonic 300 AAC Blackout 110-125 grain 300 Blackout ammunition was designed to produce a similar ballistic effect on target of a 7.62 x 39 mm round but out of a 9″ barreled AR platform carbine. At 300 meters, 300 Blackout has 16.7% more energy than a 7.62 x 39mm round. A supersonic round fired from a 9″ barreled AR pattern 300 Blackout carbine will match or exceed the energy at the muzzle of a 14.5″ 5.56 M4 carbine.
BCM 300 Blackout carbines use the exact same components, down to the magazines, as the rest of our carbine fleet with the exception of the barrels. This also means an end user can utilize both their existing magazines and AR accessories to fine tune the feel of their carbine, same as any other M4 or Recce rifle.
The 300 Blackout line of BCM carbines are built on our 1:7 Twist 11595E Certified Steel barrels. The bore on each BCM Enhanced Barrel is honed to perfect the rifled finish prior to chrome lining both bore and chamber. With a continuous taper profile designed to optimize balance, performance and weight; each BCM barrel is fluted toward the rear near chamber, increasing strength and speeding heat dissipation. Barrel harmonics and accuracy have been further improved by removing the sharp handguard cap shoulder commonly associated with AR platform barrels. Reliable, mil-spec quality, BCM Enhanced Barrels will deliver a repeated positive effect on target, every time you press the trigger.
For more information about the 300 Blackout caliber, its conversion and its performance (also at distance) please take a look at what Travis Haley from Haley Strategic Partners has to say after one year of test and evaluation with this platform.
Kinetic Development Group | 2015 Update
Kinetic Development Group has been releasing a lot of great new products in the last few months. They have been focusing mainly on the FNH Herstal SCAR platform, diversifying from most of the other firearm accessories manufacturers on the market. We have already introduced you to the SCAR Adaptable Stock (SAS) a few months ago. Since then KDG has released some other interesting products both for the SCAR and AR platform (technically any platform thanks to the Magpul M-LOK system [Read our article]). They started by providing the FN SCAR operator an alternative extended aluminum rail system that would provide the same customization and attachment options as most ARs do, this is the MREX (Modular Receiver EXtention).
KDG has also released in the past few moths a new mounting system based on the M-Lok platform: the Kinect QD. This line of Quick-Detach mounts allows the operator to change and swap accessories on the weapon within seconds. There are two spring-loaded wedges in the base of the Kinect™ mounting point. When you press the accessory or rail section down in the MLOK™ slot, two tiny deployment triggers get pressed against the rail firing the wedges into place. There is nothing more frustrating that fiddling with an allen wrench (if you can find it) to get your accessories on an off your weapon with traditional modular rail sections. This changes the whole dynamic of the MLOK™ system and really makes every accessory truly removable with the ability to mount it in a second when needed. Due to the high quality materials and engineering skills this system does not fear recoil or hard use.
The last product line KDG has released is the Sidelock Optic Mounts. The first one to arrive on the market was designed for the Aimpoint Comp M4. The patented cam system locks the mount down onto picatinny without the need of tools, side levers, or huge knobs. The release system allows users to change out their optics on the fly with less hassle. The 3 levels of locks insure the optic will not move unintentionally, maintaining zero for the shooter, and returning to zero when remounting in the same position after removal. They have now released two other optics mounts: the Sidelock Universal Scope Riser (that features a plain 1913 rail system) and the Sidelock Aimpoint Micro Mount.
Blue Force Gear | Dapper Kit

Blue Force Gear has now released the full line of Dapper Organization products. These pouches and panels were first introduced to the market at Shot Show, last January. Blue Force Gear is well known for smart and extremely-lightweight products. We have use extensively their Ten Speed line of pouches and we are excited to see the same technology applied to the EDC segment.
As for now the Dapper line consists of 3 series of hook and loop attachments: Mag pouches, Elastic loops and Clear zip pockets.
The Ten-Speed Magazine Dapper combines the legendary Ten-Speed performance with the flexibility of the Dapper system to provide the lightest, low profile way to carry spare magazines or other similar-sized items. Military-grade elastic pockets hold most double or single stack pistol magazines, lights, multitools, or other similar-sized items secure and in place. The Ten-Speed® pockets lie flat when not in use for reduced bulk and greater storage flexibility.
The Utility Dapper Pouch is a larger utility pouch to hold most everyday items and mission gear such as chargers, personal items, computer equipment, medical supplies, tools, magazines or almost any other item one would carry in a bag. The Large Utility Dapper can be quickly installed and removed on any loop field to quickly change the load out, making it the ultimate in discreet, modular load carrying.
The Pouch has two blue zipper pulls that are easily located and a top rubberized carry handle for easy opening and transporting. The carry handle can be hung around most US door knobs for use when traveling. The top is transparent, allowing you to see the contents without opening the pouch. The inside is a loop field, allowing the installation of Dapper Loops for even more organization options. The pouch comes in two sizes.
The Accessory Loop Dapper uses military-grade elastic to keep smaller items in place and organized. The smaller loops hold cables, batteries, chem lights, medical supplies, pens and other smaller items in place.
The Large Accessory Loop Dapper holds larger items such as tourniquet straps, bandages, large bundles of cables, 550 cord or smaller electronics such as GPS units, point and shoot cameras and most phones. The Accessory Loop Dapper is available in three different sizes: small, medium and large.
What we really like about the Dapper Organizers is the flexibility of it. Where you are an Operator overseas, a First Responder or even just a student who wants his backpack neat and organized this is the right product for you. The fact that the same product could be used for a Direct-Action backpack, a EDC Bag or even a car (or TacticalWalls) makes your kit very versatile and efficient.
For more information please visit BlueForceGear.com
Haley Strategic releases FlatPack

The Haley Strategic Partners D3 FlatPack is an expandable compact assault pack. Designed with a unique expandable gusset system, the D3 FlatPack is an assault pack that can go from an almost flat profile when compressed to 600 cubic inches when completely expanded. It is Available in four different colors: Black, Coyote, Multicam and Ranger Green. In its compressed state, the D3 FlatPack can run a 1 liter hydration bladder in the main compartment with additional small items like batteries, energy gels and chem lights stored in the dedicated admin chamber. Expanded, the main compartment can fit a fully loaded D3CR, a helmet or a jacket while the admin can fit electronics and/or small binoculars.
The FlatPack integrates with a D3CR or D3CR-H, replacing the H harness with the pack straps, to create a light reconnaissance, patrol or an EDC worst case scenario rig. The FlatPack will also molle into any PALS based nylon system including plate carriers, assault vests or other packs with external PALs webbing.
Although designed with the Special Operations end user in mind, the D3 FlatPack also makes an excellent everyday pack for civilians looking for a very compact carry bag that doesn’t scream military. Able to safely transport electronics such as the iPad, MacBook (12″) or any laptop or tablet up to 8″ x 12″, the padded inner chamber can also hold a number of items ranging from books and periodicals to digital cameras.
The D3 FlatPack can hold the HSP D3CR making it a very compact and reliable pack to carry a chest rig in a covert situation. During the transition from covert to overt, one the D3CR is deployed, the operator is able to slim back down the pack and integrate it with the chest rig, making this system a great site exploitation bag.
Materials and Weight:
500D Cordura Mil-Spec nylon
16 ounces
Main Compartment:
200 cubic inches expandable to 600 cubic inches
Computers (max size 8″x 12″) will fit when fully compressed
Admin Compartment:
50 cubic inches that can also be expanded to 100 cubic inches
Integration:
With the HSP D3CR to create a patrol system
Any PALs based systems (such as plate carriers)
Berry Compliant:
Berry Amendment (10 U.S.C. 2533a) compliant as implemented by DFARS
Sig launches Sig Sauer Silencers

Every shooter should enjoy the hearing safety, reduced felt recoil and optimized overall experience of a silenced firearm, whether at the range or on a hunt. SIG SAUER is committed to making silencers accessible to more shooters by advancing silencer legislation and by increasing the affordability of silencers through smarter engineering and design.
Introducing Taper-Lok™—a next-generation technology, exclusive to SIG SAUER Silencers. This innovative, three-piece system is built for speed, accuracy and repeatability over time. Modular design allows for simple and economical changes to your muzzle configuration. Integrated wrench flats mean no ratchet teeth to wear out or damage. Provides the least zero-shift even through multiple install/removal cycles.
For each caliber Sig Sauer allows the operator to chose between the different attachment systems, materials and dimensions; making each and every suppressor suited for the job. Sig Sauer, as for now, provides the user six different caliber: 5.56, 7.62 and .338 LM, .22, 9 mm and .45 ACP.
Rugged, 17-4 stainless steel baffles are enclosed by a titanium tube for leading durability and the lightest pistol silencers available. The interchangeable baffles allow for easy silencer assembly and maintenance. The most common standard and metric pistons are included in every box, allowing you to use the same silencer on a full arsenal of host pistols.
Sig Sauer Silencers will be soon available for a very reasonable price. Maybe this time your wife won’t be so upset we she finds out how much you spent on your AR.
Kinetic Development Group | SCAR Adaptable Stock

The new Kinetic SAS kit takes the amazing Magpul designed Masada (ACR-E) stock system and allow for direct use with your SCAR platform rifle. Stock ships fully assembled with SCAR adapter for drop in use.
Just a few months ago, Kinetic Development Group launched its company with the promise to bring solutions to the small arms market existing with high quality firearms. They started with the FN SCAR as many SCARs are deployed with our Special Operations Forces. They also recognize the 16S and 17S are increasingly popular with American shooters and law enforcement.
Their first products, the MREX (modular rail extensions) for the front end of the SCAR has been very popular. The KDG front and rear sling points have also brought the SCAR into the year 2015 as far as QD sling solutions go. Well, they have just addressed another common complaint about SCAR. Some refer to it as the SCAR’s “UGG Boot” like stock system.
SAS kits come standard with 7 positions of length adjustment, cheek weld height adjustment, an AMBI QD sling attachment point, a weatherproof battery compartment, and a side-folding feature. Like the factory stock, the weapon can be fired with the stock folded. KDG also added an optional set-screw to allow users the option to eliminate any play between the stock and receiver.
The stock and adapter comes fully assembled from KDG. There are no tools required to install on your SCAR! The whole system retails for $299.00 and can be purchased at www.kineticdg.com or a dealer listed near you found on their website.www.kinetidg.com/dealers