BCM | 300 Blackout
Bravo Company Manufacturing has released a full line of 300 Blackout carbines and upper receivers. With this latest addition, BCM has officially entered the 300 blk segment of the firearm industry. The many similarities in the components of the weapon platform between .223 (or 5.56) and 300 Blackout allow an easy and cost effective caliber conversion.
In the past few years we have seen many other companies entering the 300 Blk market; we are very glad to see one of the best firearms manufacturer following the same steps. BCM will be offering the 300 Blackout upper receiver in 16″ RECCE, 12.5″ CQB and 10″ Pistol lengths.
Approved by SAAMI on 17 January, 2011, Supersonic 300 AAC Blackout 110-125 grain 300 Blackout ammunition was designed to produce a similar ballistic effect on target of a 7.62 x 39 mm round but out of a 9″ barreled AR platform carbine. At 300 meters, 300 Blackout has 16.7% more energy than a 7.62 x 39mm round. A supersonic round fired from a 9″ barreled AR pattern 300 Blackout carbine will match or exceed the energy at the muzzle of a 14.5″ 5.56 M4 carbine.
BCM 300 Blackout carbines use the exact same components, down to the magazines, as the rest of our carbine fleet with the exception of the barrels. This also means an end user can utilize both their existing magazines and AR accessories to fine tune the feel of their carbine, same as any other M4 or Recce rifle.
The 300 Blackout line of BCM carbines are built on our 1:7 Twist 11595E Certified Steel barrels. The bore on each BCM Enhanced Barrel is honed to perfect the rifled finish prior to chrome lining both bore and chamber. With a continuous taper profile designed to optimize balance, performance and weight; each BCM barrel is fluted toward the rear near chamber, increasing strength and speeding heat dissipation. Barrel harmonics and accuracy have been further improved by removing the sharp handguard cap shoulder commonly associated with AR platform barrels. Reliable, mil-spec quality, BCM Enhanced Barrels will deliver a repeated positive effect on target, every time you press the trigger.
For more information about the 300 Blackout caliber, its conversion and its performance (also at distance) please take a look at what Travis Haley from Haley Strategic Partners has to say after one year of test and evaluation with this platform.
Kinetic Development Group | 2015 Update
Kinetic Development Group has been releasing a lot of great new products in the last few months. They have been focusing mainly on the FNH Herstal SCAR platform, diversifying from most of the other firearm accessories manufacturers on the market. We have already introduced you to the SCAR Adaptable Stock (SAS) a few months ago. Since then KDG has released some other interesting products both for the SCAR and AR platform (technically any platform thanks to the Magpul M-LOK system [Read our article]). They started by providing the FN SCAR operator an alternative extended aluminum rail system that would provide the same customization and attachment options as most ARs do, this is the MREX (Modular Receiver EXtention).
KDG has also released in the past few moths a new mounting system based on the M-Lok platform: the Kinect QD. This line of Quick-Detach mounts allows the operator to change and swap accessories on the weapon within seconds. There are two spring-loaded wedges in the base of the Kinect™ mounting point. When you press the accessory or rail section down in the MLOK™ slot, two tiny deployment triggers get pressed against the rail firing the wedges into place. There is nothing more frustrating that fiddling with an allen wrench (if you can find it) to get your accessories on an off your weapon with traditional modular rail sections. This changes the whole dynamic of the MLOK™ system and really makes every accessory truly removable with the ability to mount it in a second when needed. Due to the high quality materials and engineering skills this system does not fear recoil or hard use.
The last product line KDG has released is the Sidelock Optic Mounts. The first one to arrive on the market was designed for the Aimpoint Comp M4. The patented cam system locks the mount down onto picatinny without the need of tools, side levers, or huge knobs. The release system allows users to change out their optics on the fly with less hassle. The 3 levels of locks insure the optic will not move unintentionally, maintaining zero for the shooter, and returning to zero when remounting in the same position after removal. They have now released two other optics mounts: the Sidelock Universal Scope Riser (that features a plain 1913 rail system) and the Sidelock Aimpoint Micro Mount.
Blue Force Gear | Dapper Kit
Blue Force Gear has now released the full line of Dapper Organization products. These pouches and panels were first introduced to the market at Shot Show, last January. Blue Force Gear is well known for smart and extremely-lightweight products. We have use extensively their Ten Speed line of pouches and we are excited to see the same technology applied to the EDC segment.
As for now the Dapper line consists of 3 series of hook and loop attachments: Mag pouches, Elastic loops and Clear zip pockets.
The Ten-Speed Magazine Dapper combines the legendary Ten-Speed performance with the flexibility of the Dapper system to provide the lightest, low profile way to carry spare magazines or other similar-sized items. Military-grade elastic pockets hold most double or single stack pistol magazines, lights, multitools, or other similar-sized items secure and in place. The Ten-Speed® pockets lie flat when not in use for reduced bulk and greater storage flexibility.
The Utility Dapper Pouch is a larger utility pouch to hold most everyday items and mission gear such as chargers, personal items, computer equipment, medical supplies, tools, magazines or almost any other item one would carry in a bag. The Large Utility Dapper can be quickly installed and removed on any loop field to quickly change the load out, making it the ultimate in discreet, modular load carrying.
The Pouch has two blue zipper pulls that are easily located and a top rubberized carry handle for easy opening and transporting. The carry handle can be hung around most US door knobs for use when traveling. The top is transparent, allowing you to see the contents without opening the pouch. The inside is a loop field, allowing the installation of Dapper Loops for even more organization options. The pouch comes in two sizes. 
The Accessory Loop Dapper uses military-grade elastic to keep smaller items in place and organized. The smaller loops hold cables, batteries, chem lights, medical supplies, pens and other smaller items in place.
The Large Accessory Loop Dapper holds larger items such as tourniquet straps, bandages, large bundles of cables, 550 cord or smaller electronics such as GPS units, point and shoot cameras and most phones. The Accessory Loop Dapper is available in three different sizes: small, medium and large.
What we really like about the Dapper Organizers is the flexibility of it. Where you are an Operator overseas, a First Responder or even just a student who wants his backpack neat and organized this is the right product for you. The fact that the same product could be used for a Direct-Action backpack, a EDC Bag or even a car (or TacticalWalls) makes your kit very versatile and efficient.
For more information please visit BlueForceGear.com
Magpul | MLok Tripod Adapter
The M-LOK Tripod Adapter for metal M-LOK compatible hand guards or forends mounts directly onto any tripod head equipped with the common Manfrotto RC2/Q2 interface. This adapter allows the user to mount their rifle directly to a tripod head without the use of any additional saddles giving them a secure shooting platform.
The M-LOK Tripod Adapter is machined from aluminum and finished in Mil-Spec anodizing which offers excellent corrosion resistance. The beveled ends and corners produce a minimal footprint allowing the user to keep the M-LOK Tripod Adapter attached to the weapon system at all times with minimal snagging hazards.
Made in U.S.A.
FEATURES
- Compatible exclusively with Manfrotto products using RC2/Q2 rapid connect adapter
- Directly mounts to metal M-LOK hand guards and forends (not intended for use with polymer hand guards or forends)
- Cammed T-Nuts
- Mil-Spec anodized aluminum
- Compact and low profile, covers only two M-LOK slots
- Beveled ends and corners
- Recoil/impact mitigation lugs
Haley Strategic releases FlatPack
The Haley Strategic Partners D3 FlatPack is an expandable compact assault pack. Designed with a unique expandable gusset system, the D3 FlatPack is an assault pack that can go from an almost flat profile when compressed to 600 cubic inches when completely expanded. It is Available in four different colors: Black, Coyote, Multicam and Ranger Green. 
In its compressed state, the D3 FlatPack can run a 1 liter hydration bladder in the main compartment with additional small items like batteries, energy gels and chem lights stored in the dedicated admin chamber. Expanded, the main compartment can fit a fully loaded D3CR, a helmet or a jacket while the admin can fit electronics and/or small binoculars. 
The FlatPack integrates with a D3CR or D3CR-H, replacing the H harness with the pack straps, to create a light reconnaissance, patrol or an EDC worst case scenario rig. The FlatPack will also molle into any PALS based nylon system including plate carriers, assault vests or other packs with external PALs webbing. 
Although designed with the Special Operations end user in mind, the D3 FlatPack also makes an excellent everyday pack for civilians looking for a very compact carry bag that doesn’t scream military. Able to safely transport electronics such as the iPad, MacBook (12″) or any laptop or tablet up to 8″ x 12″, the padded inner chamber can also hold a number of items ranging from books and periodicals to digital cameras. 
The D3 FlatPack can hold the HSP D3CR making it a very compact and reliable pack to carry a chest rig in a covert situation. During the transition from covert to overt, one the D3CR is deployed, the operator is able to slim back down the pack and integrate it with the chest rig, making this system a great site exploitation bag. 
Materials and Weight:
500D Cordura Mil-Spec nylon
16 ounces
Main Compartment:
200 cubic inches expandable to 600 cubic inches
Computers (max size 8″x 12″) will fit when fully compressed
Admin Compartment:
50 cubic inches that can also be expanded to 100 cubic inches
Integration:
With the HSP D3CR to create a patrol system
Any PALs based systems (such as plate carriers)
Berry Compliant:
Berry Amendment (10 U.S.C. 2533a) compliant as implemented by DFARS 
Sig launches Sig Sauer Silencers
Every shooter should enjoy the hearing safety, reduced felt recoil and optimized overall experience of a silenced firearm, whether at the range or on a hunt. SIG SAUER is committed to making silencers accessible to more shooters by advancing silencer legislation and by increasing the affordability of silencers through smarter engineering and design.
Introducing Taper-Lok™—a next-generation technology, exclusive to SIG SAUER Silencers. This innovative, three-piece system is built for speed, accuracy and repeatability over time. Modular design allows for simple and economical changes to your muzzle configuration. Integrated wrench flats mean no ratchet teeth to wear out or damage. Provides the least zero-shift even through multiple install/removal cycles. 
For each caliber Sig Sauer allows the operator to chose between the different attachment systems, materials and dimensions; making each and every suppressor suited for the job. Sig Sauer, as for now, provides the user six different caliber: 5.56, 7.62 and .338 LM, .22, 9 mm and .45 ACP. 
Rugged, 17-4 stainless steel baffles are enclosed by a titanium tube for leading durability and the lightest pistol silencers available. The interchangeable baffles allow for easy silencer assembly and maintenance. The most common standard and metric pistons are included in every box, allowing you to use the same silencer on a full arsenal of host pistols. 
Sig Sauer Silencers will be soon available for a very reasonable price. Maybe this time your wife won’t be so upset we she finds out how much you spent on your AR.
FirstSpear focus | Adaptive Cummerbund
The Adaptive Cummerbund is the next step in the FirstSpear system approach. Up to now, you’ve been able to exchange front panels for several carriers. Now, you can take full advantage of their Tubes technology. Tubes are located at both front and rear of the cummerbund meaning you can easily swap them out, as well as front and rear panels. 
It is currently available in the “land” style with loop Velcro on the body side for Ragnar pockets, as well as a TFSS maritime flotation cummerbund specifically designed for combat swimmers, and/or maritime airborne operations personnel. 
The TFSS cummerbund has been designed and tested for use during egress from a submerged structure of any type, providing 45lbs of positive flotation in seawater at a depth of 33 ft, 57lbs of positive flotation at a depth of 15 ft and 80lbs of flotation on the surface, allowing the wearer a maximum load-out of equipment. 
Soft Armor Ballistic Inserts complying with NIJ Category IIIA.06 or specific Military Specification requirements are available from FirstSpear for an additional fee. This video will bring it all together. These Adaptive Cummerbunds are just the beginning. Look for FIrstSpear to add purpose built sections for the Adaptive Cummerbund as well as integration of other mission essential elements. Available in Black, Ranger Green, Multicam, and Coyote
[Photo credit: First Spear] [Article credit: Soldier Systems]
SHOT2015 | New Products from MAGPUL
This year at SHOT Show Magpul has released some very interesting products. The first segment is dedicated to the “marriage” between Uncle Sam and Mother Russia with the release of some new rifle furniture for AKs.
Magpul ZHUKOV-S Stock
The Magpul Zhukov-S Stock is a no-compromise folding stock for the modern AK. The Zhukov-S Stock casts aside traditional AK stock shortcomings and offers a folding, collapsible stock with QD sling mounts, modular Cheek Risers, and a shock-absorbing rubber butt-pad for superior traction. The Zhukov has right-side folding for compatibility with side-mounted optics. Designed to fit most common stamped AK receivers without modification via a unique wedge block, the durable injection molded polymer Zhukov-S Stock redefines the human interface with the AK platform. 
Magpul MOE AK Stock
Providing Magpul construction and ingenuity to the venerable AK platform, the Magpul MOE AK Stock is an optimized fixed stock for most stamped-receiver rifles. Featuring the unique wedge block fitment of the Zhukov-S Stock, the MOE AK Stock provides internal storage, optimized QD sling swivel placement, a shock absorbing rubber butt-pad for positive placement, and user-selectable snap on Cheek Risers.
Magpul PMAG D-60 AR/M4
The PMAG D-60 is a durable, lightweight, highly reliable 60-round 5.56×45 NATO/.223 Remington polymer magazine for AR15/M4 compatible weapons. With a larger capacity than previous PMAGs, the PMAG D-60 gives the shooter 60 rounds of ammunition, effectively allowing the same round count as two standard capacity 30-round magazines without requiring a critical reload. The unique drum configuration keeps the height of the magazine manageable as well, allowing prone firing and easier storage. Features a paint pen dot matrix for easy marking and a rear window for instant capacity indication. Compatible with a wide range of NATO firearms such as the M4, M16, SCAR MK16/16S, HK416, MR556, M27 IAR, and others. 
Magpul PMAG GL9 – Glock 17
The PMAG 17 GL9 is a 17-round magazine featuring durable polymer construction, paint pen dot-matrix for labeling, tool-less floor plate removal for ease of maintenance, and a visible capacity indicator hole on the body. The PMAG 17 GL9 is compatible with all full-size 9mm Glock handguns, as well as compact and sub-compact variants with some protrusion below the grip. 
Magpul HUNTER 700 Stock
Made from reinforced polymer and a machine finished, anodized A380 cast aluminum bedding block, the Magpul Remington 700 Hunter Stock offers users a fully adjustable length of pull, comb height, and enhanced ergonomics. Compatible with all Remington 700 Short Actions, this stock requires no bedding and is a true “drop-in” solution for the end user. This stock is also M-LOK compatible to accept a broad range of accessories. Also available is our Bolt Action Magazine Well, which allows the rifle to be used with detachable box magazines without the need for custom inletting. 
The Leupold D-EVO | Dual Enhanced View Optic
The D-EVO is a 6×20 fixed power prism optic which uses mirrors and lenses to get the job done. It could be used stand alone but it’s meant to be used in conjunction with a Red Dot Sight.
Developed over the last year, the Dual-Enhanced View Optic has many features being considered for the Army’s future Squad Common Optic. Leupold chose to integrate the Close Mid-Range Reticle with Wind holds (CMR-W) from the popular MK6 line (7.62 version below for illustration). It offers bullet drop to 600m as well as windage but this version uses averages for 5.56 and 7.62 cartridges. It offers up to 50 mils of windage and elevation adjustment with 0.1 mil increments per click of the dials.
The D-EVO is 2″ tall, 4.6″ long, taking up only 3.2″ of rail space due to its mount. It weighs 13.8 oz and is waterproof to 66 feet.
The photo above is looking out at about 200m while the image below is at 100m. 
Credit: Leupold Optics, Soldier Systems
Gerber Cortex Flashlight | The Outdoors Master
Gerber is a recognized leader in military-grade tactical products. We had the chance to test for a few months one of their new Cortex flashlights.
These lights are proudly built in the US and are designed to meet the needs of the military professionals. The Gerber Cortex series is comprised of three flashlights: the Cortex, the Cortex Compact and the Cortex Rechargeable. This line of lights features the Gerber’s patented Omnivore technology, which allows them to operate on multiple powers sources. The Cortex and Cortex Compact can operate on either AA or Lithium CR123A batteries, while the Cortex Rechargeable runs on Lithium Ion 18650 battery but will also accept disposable CR123A batteries.
The Cortex Flashlight is built with adaptability in mind. It can run on either three Lithium CR123A batteries or two AA batteries. The Cortex accepts both alkaline and lithium, providing the operator with flexibility when battery choices are limited. With a maximum output of 675 Lumens (when running on three CR123 batteries), the Cree XML LED provides a level of light than can be effectively utilized to overwhelm an aggressor or identify a threat. In an outdoor environment this light can be effective for hundreds of yards.
Light beam at distance of 10 m (33 feet)
Light beam at distance of 20 m (66 feet)
As you can see from the images above the light has a very wide outer beam, while still having a focused hot spot in the middle. We believe that Gerber has found a good balance between wide-external and focused-central. This fine combination allows the operator to enhance its situational awareness while still being able to utilize the tool actively and selectively. The tail switch cap allows to select between three modes: high, low and strobe. The low mode provides an output of 40 Lumens and is well suited for administrative tasks.
The light is built with heavy duty in mind. The Cortex is made of aircraft grade anodized aluminium which feels solid and tough as soon as you grab it. Because of its aggressive design, the bezel can be used as a striking tool or even to brake glass, in case things go very south.
The light is also provided with a built in clip, for easier carry when a sheath is not available.
We believe that this flashlight could be very interesting especially for those who live in Europe, while other US made flashlights are very expensive this seems to have an excellent Quality/Price ratio. For the pure tactical application (CQB, even weapon mounted) we prefer to have a momentary only switch. But this product still does a very good job for a personal defense task. In all these months that we have been using this product (and we didn’t treat is very good) we have never experienced a failure of any kind. We have accidentally dropped this light for quite some distance and every thing was fine, and even underwater it worked magnificently.
We recommend this light for its adaptability, and we would definitely keep it in my car or in a Go bag. The Cortex’s adaptability and versatility make it a tool you must have. The fact that you can utilize this light for personal defense, search and rescue and general outdoor/tactical applications definitely make this flashlight one of the best we have ever owned.
So if you need to purchase a flashlight that can do the work of 3 or 4 we strongly recommend this. If you are looking for a light to keep on your person when hiking in the mountains, operating overseas, rescuing, hunting or even as and EDC tool, this is the one.
The Gerber Cortex flashlight is available at GerberGear.com
Urban Survivor Blog 
