Haley Strategic Partners|D3CRX
The Haley Strategic D3CR (or Disruptive Environments™ Chest Rig) has been, since its first release, one of the most adaptable and versatile Chest-Rigs on the market. After the release of the first version that allows to carry 4 rifle magazines (both STANAG and AK 7.62 x 39mm and 5.45 x 39mm) they have focused on the 7.62 NATO and 308 market with the D3CR-Heavy. These products have always shared many features in their designs, both structural and pouches placement.
With the latests addition in the line HSP will provide the user with a parallel option to the original D3CR.
The new Disruptive Environments™ Chest Rig X mainly features a different configuration of storage capabilities; they have substituted the bungee multi-purpose pouch with two Multi-Mission pouches. This modification creates a much more streamlined set-up and provides the user with more options -regarding the carry of multi-tools, hand-held flashlights and sidearm magazines. The Multi-Mission pouch houses magazines of the most popular single-stack and double-stack handguns keeping very good retention with both a bungee cord and a magnet.
The new chest rig borrows the X nomenclature by the new X-shaped harness design; conceived for added comfort in prolonged uses and for further user-adjustably. The D3CRX does not preclude the use of any Haley Strategic Accessories.
The D3CRX is available in Black and Tan for $180 and in Multicam and Multicam Black for $ 185.
For more information please visit Haley Strategic Partners‘s website: haleystrategic.com/equipment/chestrigs/d3crx
BCM | 300 Blackout

Bravo Company Manufacturing has released a full line of 300 Blackout carbines and upper receivers. With this latest addition, BCM has officially entered the 300 blk segment of the firearm industry. The many similarities in the components of the weapon platform between .223 (or 5.56) and 300 Blackout allow an easy and cost effective caliber conversion.
In the past few years we have seen many other companies entering the 300 Blk market; we are very glad to see one of the best firearms manufacturer following the same steps. BCM will be offering the 300 Blackout upper receiver in 16″ RECCE, 12.5″ CQB and 10″ Pistol lengths.
Approved by SAAMI on 17 January, 2011, Supersonic 300 AAC Blackout 110-125 grain 300 Blackout ammunition was designed to produce a similar ballistic effect on target of a 7.62 x 39 mm round but out of a 9″ barreled AR platform carbine. At 300 meters, 300 Blackout has 16.7% more energy than a 7.62 x 39mm round. A supersonic round fired from a 9″ barreled AR pattern 300 Blackout carbine will match or exceed the energy at the muzzle of a 14.5″ 5.56 M4 carbine.
BCM 300 Blackout carbines use the exact same components, down to the magazines, as the rest of our carbine fleet with the exception of the barrels. This also means an end user can utilize both their existing magazines and AR accessories to fine tune the feel of their carbine, same as any other M4 or Recce rifle.
The 300 Blackout line of BCM carbines are built on our 1:7 Twist 11595E Certified Steel barrels. The bore on each BCM Enhanced Barrel is honed to perfect the rifled finish prior to chrome lining both bore and chamber. With a continuous taper profile designed to optimize balance, performance and weight; each BCM barrel is fluted toward the rear near chamber, increasing strength and speeding heat dissipation. Barrel harmonics and accuracy have been further improved by removing the sharp handguard cap shoulder commonly associated with AR platform barrels. Reliable, mil-spec quality, BCM Enhanced Barrels will deliver a repeated positive effect on target, every time you press the trigger.
For more information about the 300 Blackout caliber, its conversion and its performance (also at distance) please take a look at what Travis Haley from Haley Strategic Partners has to say after one year of test and evaluation with this platform.
Haley Strategic Partners | One Pack to Rule Them All
For more information about the Haley Strategic FlatPack:
FlatPack Release article: urbansurvivorblog.com/2015/05/22/haley-strategic-releases-flatpack/
Haley Strategic Partners website: haleystrategic.com/flatpack/
Haley Strategic Partners | INCOG Shadow for SureFire XC1

Haley Strategic Partners has just released the new version of the INCOG Shadow Holster for the latest model of weapon-mounted pistol light from SureFire. The smaller 200 Lumen SureFire XC1 will allow the operator to better conceal the weapon even in low light conditions. The holster is sold both with or without the +1 mag caddy. The latest addition to the incognito line from HSP will start shipping in September.
Please visit:
haleystrategic.com/xc1/
surefire.com/xc1-led-weaponlight.html
Haley Strategic releases FlatPack

The Haley Strategic Partners D3 FlatPack is an expandable compact assault pack. Designed with a unique expandable gusset system, the D3 FlatPack is an assault pack that can go from an almost flat profile when compressed to 600 cubic inches when completely expanded. It is Available in four different colors: Black, Coyote, Multicam and Ranger Green. In its compressed state, the D3 FlatPack can run a 1 liter hydration bladder in the main compartment with additional small items like batteries, energy gels and chem lights stored in the dedicated admin chamber. Expanded, the main compartment can fit a fully loaded D3CR, a helmet or a jacket while the admin can fit electronics and/or small binoculars.
The FlatPack integrates with a D3CR or D3CR-H, replacing the H harness with the pack straps, to create a light reconnaissance, patrol or an EDC worst case scenario rig. The FlatPack will also molle into any PALS based nylon system including plate carriers, assault vests or other packs with external PALs webbing.
Although designed with the Special Operations end user in mind, the D3 FlatPack also makes an excellent everyday pack for civilians looking for a very compact carry bag that doesn’t scream military. Able to safely transport electronics such as the iPad, MacBook (12″) or any laptop or tablet up to 8″ x 12″, the padded inner chamber can also hold a number of items ranging from books and periodicals to digital cameras.
The D3 FlatPack can hold the HSP D3CR making it a very compact and reliable pack to carry a chest rig in a covert situation. During the transition from covert to overt, one the D3CR is deployed, the operator is able to slim back down the pack and integrate it with the chest rig, making this system a great site exploitation bag.
Materials and Weight:
500D Cordura Mil-Spec nylon
16 ounces
Main Compartment:
200 cubic inches expandable to 600 cubic inches
Computers (max size 8″x 12″) will fit when fully compressed
Admin Compartment:
50 cubic inches that can also be expanded to 100 cubic inches
Integration:
With the HSP D3CR to create a patrol system
Any PALs based systems (such as plate carriers)
Berry Compliant:
Berry Amendment (10 U.S.C. 2533a) compliant as implemented by DFARS
SHOT2015 | New Products from MAGPUL

This year at SHOT Show Magpul has released some very interesting products. The first segment is dedicated to the “marriage” between Uncle Sam and Mother Russia with the release of some new rifle furniture for AKs.
Magpul ZHUKOV-S Stock
The Magpul Zhukov-S Stock is a no-compromise folding stock for the modern AK. The Zhukov-S Stock casts aside traditional AK stock shortcomings and offers a folding, collapsible stock with QD sling mounts, modular Cheek Risers, and a shock-absorbing rubber butt-pad for superior traction. The Zhukov has right-side folding for compatibility with side-mounted optics. Designed to fit most common stamped AK receivers without modification via a unique wedge block, the durable injection molded polymer Zhukov-S Stock redefines the human interface with the AK platform.
Magpul MOE AK Stock
Providing Magpul construction and ingenuity to the venerable AK platform, the Magpul MOE AK Stock is an optimized fixed stock for most stamped-receiver rifles. Featuring the unique wedge block fitment of the Zhukov-S Stock, the MOE AK Stock provides internal storage, optimized QD sling swivel placement, a shock absorbing rubber butt-pad for positive placement, and user-selectable snap on Cheek Risers.
Magpul PMAG D-60 AR/M4
The PMAG D-60 is a durable, lightweight, highly reliable 60-round 5.56×45 NATO/.223 Remington polymer magazine for AR15/M4 compatible weapons. With a larger capacity than previous PMAGs, the PMAG D-60 gives the shooter 60 rounds of ammunition, effectively allowing the same round count as two standard capacity 30-round magazines without requiring a critical reload. The unique drum configuration keeps the height of the magazine manageable as well, allowing prone firing and easier storage. Features a paint pen dot matrix for easy marking and a rear window for instant capacity indication. Compatible with a wide range of NATO firearms such as the M4, M16, SCAR MK16/16S, HK416, MR556, M27 IAR, and others.
Magpul PMAG GL9 – Glock 17
The PMAG 17 GL9 is a 17-round magazine featuring durable polymer construction, paint pen dot-matrix for labeling, tool-less floor plate removal for ease of maintenance, and a visible capacity indicator hole on the body. The PMAG 17 GL9 is compatible with all full-size 9mm Glock handguns, as well as compact and sub-compact variants with some protrusion below the grip.
Magpul HUNTER 700 Stock
Made from reinforced polymer and a machine finished, anodized A380 cast aluminum bedding block, the Magpul Remington 700 Hunter Stock offers users a fully adjustable length of pull, comb height, and enhanced ergonomics. Compatible with all Remington 700 Short Actions, this stock requires no bedding and is a true “drop-in” solution for the end user. This stock is also M-LOK compatible to accept a broad range of accessories. Also available is our Bolt Action Magazine Well, which allows the rifle to be used with detachable box magazines without the need for custom inletting.
Haley Strategic Partners | The D3CR Heavy
Haley Strategic Partners has just released the Disruptive Environments Chest Rig Heavy. This new chest rig will allow a more mission specific set up for those who operate with a 308 platform while having the same slickness and low profile of an HSP soft good.
The D3CR-H addresses the same mission as the original D3CR, but has been slightly redesigned to support .308 platforms. Optimized for work in urban, vehicle, rural and other confined settings, the Disruptive Environment Chest Rig was built to be worn as a stand alone system with a detachable H-harness or clipped into a armor platform equipped with a quick release system.
When run as a stand alone, the platform is low profile enough to be worn fully loaded and not print on a normal/loose fit jacket or sweatshirt. When run on a armor platform with a quick release system, such as SwiftClips™, it can be attached or stowed in seconds, giving the end user the versatility to transition from low vis to high vis or vice versa.
The rig intentionally does not include a radio or dedicated full size medical pouch so no matter the posture, essentials such as communications and medical kits can remain on the end user at all times. The D3CR-H is also compatible with the Haley Strategic D3 Expansion System allowing the end user to add features including the holster wedge or multi-mission hanger pouch.
The rifle magazine pouches accept almost any .308 magazine. The Multi-Mission Pouches accept 1911, Glock, Sig, M&P, XD and other standard double or single stack pistol magazines, as well as many handheld lights and multi-tools.
The system features:
4 .308 Magazine Pouches with Hypalon® magazine retention tabs (Pouches support SR25, SCAR, FAL, AR10, M14, Lancer Systems, PMAG LR)
2 Multi-Mission Pouches with Hypalon magazine retention tabs (Fits standard double and single stack pistol magazines as well as other equipment including flashlights and multi-tools)
Zipper GP Pouch (Medical, compass, GPS, phone, batteries and other various small electronics)
Zipper Tool Pouch (Includes elastic keepers for more mission specific essentials, such as Kestrel wind meters, ballistic calculators, dope cards, batteries, tools and various electronics).
The D3CR-Heavy will be available in early December in Coyote and Multicam for $179.
Haley Strategic Partners released the INCOG Rifle Bag

Haley Strategic has just released the new INCOG Rifle Bag. It is designed to be a dicreet and adaptable carry bag/range bag. Offered in our Disruptive Grey with Black accents, the Incog Rifle Bag measures 10″ x 31″ x 3″, and fits perfectly inside a Pelican Model 1700 case. Read More…
HSP INCOG Holster, Now Available for Sphinx SDP Compact
The INCOG is a minimum bulk, multi-positional, deep concealment holster. Its distinctive features enable the concealed carry of a handgun from a variety of carry positions while facilitating the acquisition of a full firing grip on the weapon prior to the draw. Inherent are adjustments in the depth of carry, angle of carry, the position of carry and security of carry. Adjustments are supported via the unique modular mounting points on the holster and the use of variable mounting components. Combined they maximize function respective to the users: body type, deployment tactics and personal preferences. The holster is adaptive to varying operational environments and mission requirements. Read More…
Haley Strategic Patrners Introduces the D3X
Haley Strategic has introduced an upgrade product for the HSP Disruptive Environments Chest Rig (D3CR): the D3X.
The D3CR Expansion System (D3X) was built to better fit the need of an end user who needs to quickly adapt between different dynamic situations.
HSP developed the D3CR Expansion system with the idea of extending the capability of the operator, without sacrificing the low profile footprint of the D3CR.
The D3X consists of three items available in Black, Coyote and MultiCam:
The D3X Holster Wedge provides an envelope for the user to insert a holster that sits between the rig and the body armour. Available for $29.
The D3X Double Magazine Wedge velcroes directly onto the back panel of the D3CR, allowing to carry 2 extra M4 mags. Available for $35.
The D3x Multi-Mission Hanger is a drop down pouch to store any number of tools, lined with loops to secure and organize the content. Available for $45.
Attaching seamlessly to the hook panel on the back of every D3CR, the components can be used individually or pancaked into a Holster/Hanger or Double Mag/Hanger combo. These components will work on the stand-alone rigs, as well as when clipped into any plate carrier using the Velocity Systems Swift Clip Attachment System, ideally armor carriers made by Velocity Systems and Mayflower Reasearch & Consulting.