- ADC Custom 14.5″ SBR AR-15 (Article)
- Burris Optics XTRII 1-8 x 24 mm LVPO
- Burris Optics Fast Fire 3
- SilencerCo ASR Muzzle Brake
- SilencerCo Blast Shield
- Weaver 45° Optics Mount
- FROG.PRO Operator Sling
- OpsCore FAST Helmet
- Princeton Tec Remix PRO MPLS
- Princeton Tec Charge MPLS
- S&S Precision V-Lites
- CORE Survival Helstar 6 Strobe and IFF
- Streamlight TLR1-HL (Review)
- Oakley SI M-Frame Alpha and Alpha Mask
Plate Carrier and Chest Rig:
- FROG.PRO LC-AWPC Plate Carrier
- FROG.PRO LC-14CR Chest Rig
- FROG.PRO Multi-1-DR-PMF Mag Pouch
- FROG.PRO STANAG-2-AP Mag Pouch
- FROG.PRO ZU-4×3-FZ Utility Pouch
- FROG.PRO 12ga 5 Shell Molle
- Gerber Strongarm Fixed Blade Knife
- Gerber Impromptu Pen
- S&S Precision V-Lite
- Princeton Tec Switch MPLS
- FROG.PRO Cobra Operator Belt
- Blue Force Gear Single Pistol Belt Pouch
- Blue Force Gear Double Pistol Belt Pouch
- FROG.PRO 2-V2M Belt Adapter
- FROG.PRO Multi-1-DR-PMF Hybrid Mag Pouch
- Blue Force Gear High Rise M4 Belt Pouch
- Blue Force Gear Micro Trauma Kit Now!
- Gerber MP1-AR Weapons Multi-Tool
- Safariland Model 6385 Holster w/ Leg-Strap
- Suunto Traverse Alpha
- Glock 19 with Streamlight TLR1-HL
- Outdoor Research Ironsight Gloves
- Arc’teryx LEAF Knee Caps
- Arc’teryx LEAF E-70 Emergency Riggers Harness
Outdoor Research manufactures, without a doubt, some of the finest textile products in the outdoor industry. The Seattle-based company has mainly built its brand around the climbing, mountaineering and exploring community; and is now gradually increasing traction also in the tactical-military apparel market.
In the past OR, has manufactured gloves, beanies, hats, bivies and other products specifically oriented for the tactical industry. At SHOT Show 2017 we have covered the launch of a new line of tactical apparel(LINK), designed to be extremely versatile thanks to a modular layering system.
The first garment that has been released is the outer hard shell, the Infiltrator jacket.
Compared to a PCU (or Protective Combat Uniform) the Infiltrator jacket would be a level 6, which consists in a non-insulated hard-shell garment. In a PCU system the level 6 jacket and/or pant should be worn both with and without insulation underneath as it is designed to provide water protection both in warm and cold environments, as well as during both dynamic and static activities.
As we all know, insulation and warmth come at the expense of size and bulkiness, and therefore there is an issue with the mobility of the user, since traditional hard-shell fabric don’t provide any elasticity.
The revolutionary feature of Outdoor Research Infiltrator jacket is the GORE-TEX® Fabric with Stretch Technology, which is designed to solve the previously mentioned issues.
There are two specific advantaged related to the elasticity that we have experienced in the testing process: unaffected agility and ability to comfortably add layers underneath.
Unrestricted freedom of movement during high performance activities or gestures related to weapon manipulation. The GORE-TEX® Fabric with Stretch Technology panels are strategically placed in high mobile areas of the body, such as the inner-arm/ armpit as well as back / lats. These key points need to anatomically be free to expand in order provide enough liberty of movement.
Usually it is possible to feel a slight impeded movement when doing ready-up drills when wearing standard waterproof jacket; if you don’t, chances are that the garment fits loosely (which may be good for mobility but not as good for bulkiness).
With the Infiltrator, those key areas are well stretched and shooting with the jacked feels the same as shooting without, which in our opinion is the ultimate goal for a “tactical” garment manufacturer.
Ability to layer even with a very athletic fit.
The strategically placed stretch fabric panels provide a close fit in warm climates in which the jacket is worn without insulated layers underneath. At the same time, the fabric can stretch and expand to accommodate voluminous insulation layers in colder environments.
We appreciate the athletic cut of the Outdoor Research products; it is one of the features that differentiate their products from standard “military” manufacturers.
The background in the alpine, climbing, mountaineering and high-performance outdoor markets has brought a great level of know-how on their drawing board when designing a new tactical apparel line that would render the user’s movements as efficient as possible; we have, in fact, experienced negligible restriction of movement.
Freedom of movement, lightweight, pack-ability and durability of textiles are features that have been improving the “tactical” apparel segment and have originated within the performance-based outdoor community.
The streamlined design of the Infiltrator jacket provides higher comfort when wearing plate carriers, chest rigs or even backpacks, especially in dynamic environments.
The two areas in which we applied thoroughly testing were the sections considered to be under the most pressure when wearing a plate carrier, a backpack or a chest rig: the yoke and the shoulders.
The presence of a stretch panel in the cervical area of the neck provides a high degree of comfort and, in conjunction with the other stretch panels, keeps the yoke and shoulder areas wrinkle free under the weight of equipment. Under heavy rain, the fabric has kept waterproofing also in the areas in which pressure was directly applied.
As with all GORE-TEX® hard shell textiles, in warm and humid climates, the fabric has difficulty expelling moisture and heat from the inside of the garment. Therefore, we believe that quick drying is a mission essential feature that both the GORE-TEX® Fabric with Stretch Technology and the “standard” all-weather GORE-TEX® Military fabric are equipped with.
The hood was designed with a high degree of versatility in mind. It allows the user to comfortably cover the head when wearing a helmet as well as without headgear.
The “Halo-Hood” consists of a draw cord that runs the whole circumference of the head for precise adjustments and can be controlled via a cord-lock located in the occipital area of the head. The cord is enclosed in a mesh compartment sewn inside the hood, in our opinion this is a key feature if one uses tactical helmets that, equipped with lights and rails, may be caught by the hood itself.
The “Halo-Hood” provides extremely important adjustability especially if a helmet is not worn, due to the larger size of the hood in order to accommodate most helmets.
With or without headgear, the adjustments allow the user to closely secure the hood to the head; and because of the stretch panel located in the cervical area of the neck there is a large freedom movement (extension/flexion, lateral bend and especially rotation).
Vertical adjustment is provided by symmetrical draw cords accessible from the front that cinch down the hood from the temple area and are secured by cord-locks.
The helmet worn in the photos is an OpsCore helmet equipped with two S&S Precision V-Lites, a CORE Survival Helstar 6, a Princeton Tec Charge MPLS, a Princeton Tec Remix MPLS and a Oakley SI Alpha Ballistic Halo™ Goggle.
The hood provides protection to the elements even with this equipment mounted. We believe that all “tactical” oriented hard-shell should have such a feature-rich helmet.
SIDES and ARMPIT
The side of the jacket features a panel of GORE-TEX® Fabric with Stretch Technology that runs from the armpit all the way to the waistline; this section mostly allows the jacket to expand when worn on top of other insulated layers. The armpit has a no-seam construction and is not equipped with vent zippers, which could become uncomfortable after wearing with backpack straps and rifle slings for a prolonged period of time.
In order to cool down the user can open two symmetrical side vents located at the 4 and 8 o’clock positions. The two YKK® AquaGuard® Vislon zippers can be opened from the bottom, exposing the belt area or from the top, retaining a higher degree of protection from the elements with the internal storm-flap while cooling down.
The side vents can also be used to access holsters or belt mounted equipment. Shown in the photo below is a Safariland ALS holster with low-ride belt attachment.
The jacket features two capacious symmetrical front pocket (160 x 300 mm) that can be accessed via AquaGuard® zippers. The opening of the pockets is placed high enough in order to not interfere with harnesses or belt straps of backpacks.
The inner part of the pocket is built with a mesh fabric in order to allow the pocket to be used of venting, giving the user two different techniques for cooling down.
The materials used are undoubtedly innovative and, in our opinion, are truly going to raise the industry standard. Overall the Infiltrator jacket has been utilized for rucks, runs, hikes and for shooting and it does not show any sign of wear.
The equilibrium among freedom of movement, lightweight, durability, breathability, climatic adaptability and overall waterproofness truly render the Outdoor Research Infiltrator jacket a unique piece on the market and a must have in any environment.
The Infiltrator jacket is available both in Berry-Compliant and non Berry-Compliant version in Multicam, Coyote and Mas Grey.
For more information on the Outdoor Research Infiltrator Jacket please visit: Outdoor Research Tactical
The LWPC is designed with maximum versatility and speed in mind. The ability to conceal this plate carrier allows the operator to maximize the effectiveness of this platform even in uncertain environments where low-profile is the number one priority. The possibility to unzip a Jacket and attach a placard with all the mission specific equipment really makes the transition from low-profile to high-profile just a matter of seconds. The ability to change configuration in a brief period of time allows the end user to quickly adapt to the specific situation as the environment changes. The biggest feature of this plate carrier, aside from its incredible light weight, is the versatility and modularity provided by the SwiftClips. Velocity Systems and MayflowerRC have, for a long time, believed in the concept of a modular armor and load bearing system that shared the same support structure. For many years we have seen great redundancy in the operators’ equipment; a popular set-up used to be a standard chest rig worn on top of a low profile armor carrier. At the time the only alternative to this system was the bulky PALs webbing/MOLLE plate carrier (which required a lot of time to reconfigure pouch by pouch) but it would not provide the ability to quickly change set-up (from 5.56 to 7.62 or to mission specific role) like the chest rig and plate carrier combination.
To this need Velocity Systems and Mayflower RC have responded with modular placards and chest rigs that would provide the operator with the comfort of a single piece of equipment while having the versatility of multiple pre-configured modular set-ups.
In our opinion, there is a substantial difference in the set-up of this product in the various applications of agencies and civilian use.
For a military or agency type of application this product would be suited for some sort of low-profile operation in which the operator would be required to constantly wear armor, comms and, perhaps, a medical kit. The low-profile nature of the carrier would quite possibly be unnoticed but would offer protection and the ability to attach a fully equipped chest rig placard within seconds.
As for the civilian use, we think that this system could offer much more versatility that a standard MOLLE vest. The use in a civilian application would, hopefully, be for a shorter period of time and it would not require the user to wear comms and med kit on a closer level. In an event in which the civilian should respond with armor the medical kit and radio would probably store within the placard itself. The MOLLE version allows to carry 6×6” armor side plates and offers 6 columns of PALS webbing attachment.
This is why we find the MOLLE version of the cummerbunds more suitable for low-profile operations and the elastic (lighter and slicker) cummerbunds for civilian use. Off course, the interchangeability of them will allow the user to configure it to the mission requirements. The low profile nature of the elastic cummerbunds would also allow a concealed carry citizen to use his/her inside the waistband holster at the three o’clock position without any interference with the plate carrier itself.
The lower half of the front of the plate carrier is covered with loop Velcro, stitched right into the front flap. On the sides of the upper portion are the two SwiftClips, which can be removed. There is a low-profile admin pouch, also stitched with a loop Velcro panel. If you happen to have the Multicam version of this plate carrier, as we do, the “admin” and back loop Velcro panels visible from the outside are matched with the camo pattern.
It was a pleasant surprise to see that this Light Weight plate carrier has all of the features of “Standard” plate carriers. Often times, due to the weight reduction, companies tend to “lighten” the adjustability and user-configurability, not Velocity Systems and Mayflower R&C. The cummerbunds can be adjusted both from the front and from back panel. For primary fitting, it is possible to regulate on the back panel the position of the cummerbund, the end of which is provided with both hook and loop Velcro on each side; this ensures the stability and the overall ruggedness of the product. For field adjustment (or secondary adjustment), it is possible to fit the size by lifting the dedicated front panel. On the market it is usually is rare to see two fully spec’d adjustment points on such a lightweight platform.
The top straps are also adjustable, allowing fitting the perfect height of the plate carrier (on a side note, please stop wearing your plate carriers low, you know who we are talking about…). The top strap is provided with a cushioned sleeve, for load bearing comfort and cable routing. We only wrote cable and not hydration tube routing on purpose, this plate carrier is meant to be lightweight and therefore used in atypical (or asymmetrical warfare) type of scenarios such as urban and low-profile application in which there should not be the need of “field” requirements like continuous hydration on the move. If the possibly of attaching a panel or an hydration bladder is an important characteristic we suggest checking out the other plate carriers from Velocity Systems and Mayflower R&C like the SCARAB.
Both the stitching and the material used are impressive. The attention to details and the well thought design differentiate this product from a market full of plate carriers that have become almost a commodity without any peculiar feature. Velocity Systems uses 500-denier Cordura fabric for the outer layers; this provides high mechanical properties while still maintaining a low-weight discipline.
Velocity Systems and Mayflower R&C proudly use materials and workmanship that are 100% made in the USA.
For more information, please visit: VelSyst.com
The original transitional MultiCam camouflage served a very precious role for concealment in Afghanistan where varied terrain provided a problem in “blending in” with a environment specific camouflage pattern. There was although the request of a wider variety of more specific patterns of camouflages. The answer was the release of a “family” of four new types of MultiCam, which are designed to cover Arid, Tropic, and Alpine terrains. They have also released a MultiCam Black pattern specific to law enforcement.
One of the key points of MultiCam is the fact that it allows the individual on the field to move within diffrent enviroments without being easily detected. By adding these four new variants (mainly “Arid” and “Tropical”) they have enhanced the capability of the single operator, allowing a more accurate and mission specific piece of gear, while keeping the main feature of the MultiCam Pattern.
MultiCam Alpine (Snow Covered Environment)
MultiCam Arid (Open Desert Sand and Rock Terrain)
MultiCam Tropical (Lush Jungle Environment)
MultiCam Black (Law Enforcement Identification)