The LWPC is designed with maximum versatility and speed in mind. The ability to conceal this plate carrier allows the operator to maximize the effectiveness of this platform even in uncertain environments where low-profile is the number one priority. The possibility to unzip a Jacket and attach a placard with all the mission specific equipment really makes the transition from low-profile to high-profile just a matter of seconds. The ability to change configuration in a brief period of time allows the end user to quickly adapt to the specific situation as the environment changes. The biggest feature of this plate carrier, aside from its incredible light weight, is the versatility and modularity provided by the SwiftClips. Velocity Systems and MayflowerRC have, for a long time, believed in the concept of a modular armor and load bearing system that shared the same support structure. For many years we have seen great redundancy in the operators’ equipment; a popular set-up used to be a standard chest rig worn on top of a low profile armor carrier. At the time the only alternative to this system was the bulky PALs webbing/MOLLE plate carrier (which required a lot of time to reconfigure pouch by pouch) but it would not provide the ability to quickly change set-up (from 5.56 to 7.62 or to mission specific role) like the chest rig and plate carrier combination.

To this need Velocity Systems and Mayflower RC have responded with modular placards and chest rigs that would provide the operator with the comfort of a single piece of equipment while having the versatility of multiple pre-configured modular set-ups.

In our opinion, there is a substantial difference in the set-up of this product in the various applications of agencies and civilian use.

For a military or agency type of application this product would be suited for some sort of low-profile operation in which the operator would be required to constantly wear armor, comms and, perhaps, a medical kit. The low-profile nature of the carrier would quite possibly be unnoticed but would offer protection and the ability to attach a fully equipped chest rig placard within seconds.

As for the civilian use, we think that this system could offer much more versatility that a standard MOLLE vest. The use in a civilian application would, hopefully, be for a shorter period of time and it would not require the user to wear comms and med kit on a closer level. In an event in which the civilian should respond with armor the medical kit and radio would probably store within the placard itself. The MOLLE version allows to carry 6×6” armor side plates and offers 6 columns of PALS webbing attachment.

This is why we find the MOLLE version of the cummerbunds more suitable for low-profile operations and the elastic (lighter and slicker) cummerbunds for civilian use. Off course, the interchangeability of them will allow the user to configure it to the mission requirements. The low profile nature of the elastic cummerbunds would also allow a concealed carry citizen to use his/her inside the waistband holster at the three o’clock position without any interference with the plate carrier itself.

The lower half of the front of the plate carrier is covered with loop Velcro, stitched right into the front flap. On the sides of the upper portion are the two SwiftClips, which can be removed. There is a low-profile admin pouch, also stitched with a loop Velcro panel. If you happen to have the Multicam version of this plate carrier, as we do, the “admin” and back loop Velcro panels visible from the outside are matched with the camo pattern.

It was a pleasant surprise to see that this Light Weight plate carrier has all of the features of “Standard” plate carriers. Often times, due to the weight reduction, companies tend to “lighten” the adjustability and user-configurability, not Velocity Systems and Mayflower R&C. The cummerbunds can be adjusted both from the front and from back panel. For primary fitting, it is possible to regulate on the back panel the position of the cummerbund, the end of which is provided with both hook and loop Velcro on each side; this ensures the stability and the overall ruggedness of the product. For field adjustment (or secondary adjustment), it is possible to fit the size by lifting the dedicated front panel. On the market it is usually is rare to see two fully spec’d adjustment points on such a lightweight platform.

The top straps are also adjustable, allowing fitting the perfect height of the plate carrier (on a side note, please stop wearing your plate carriers low, you know who we are talking about…). The top strap is provided with a cushioned sleeve, for load bearing comfort and cable routing. We only wrote cable and not hydration tube routing on purpose, this plate carrier is meant to be lightweight and therefore used in atypical (or asymmetrical warfare) type of scenarios such as urban and low-profile application in which there should not be the need of “field” requirements like continuous hydration on the move. If the possibly of attaching a panel or an hydration bladder is an important characteristic we suggest checking out the other plate carriers from Velocity Systems and Mayflower R&C like the SCARAB.

Both the stitching and the material used are impressive. The attention to details and the well thought design differentiate this product from a market full of plate carriers that have become almost a commodity without any peculiar feature.  Velocity Systems uses 500-denier Cordura fabric for the outer layers; this provides high mechanical properties while still maintaining a low-weight discipline.

Velocity Systems and Mayflower R&C proudly use materials and workmanship that are 100% made in the USA.

For more information, please visit: VelSyst.com