Tag Archive | Aimpoint

Unity Tactical | An Inside Look

The last time we had covered some of Unity Tactical’s products was at SHOT Show 2020 (full article here: SHOT 2020 | Unity Tactical – Urban Survivor Blog)

SHOT Show 2019 | Unity Tactical

FAST Micro Mount

The FAST series of optics mount is one of the main new products for 2019 from Unity Tactical. These mount are designed to work with almost any tactical carbine optic on the market today (Leupold, Aimpoint, EoTech, SIG, Holosun, Vortex, Primary Arms…).
Innovative solutions, for very specific problems related to tactical (especially night vision) work, are not something we didn’t expect from Unity Tactical.

These mounts offer a similar solution to the optics world as the FUSION does to the IR/Lasers/Illuminators/Lights market: they provide a smarter and more efficient solution for tactical work.

This is achieved with a centerline of 2.26″; this extra height provides clearance for comms, gas masks and helmet mounted equipment.
It allows the operator to have a more natural cheek weld when using night vision passively, if the enemy has Night Vision capabilities.

In fact the neutral spine position reduces tension and fatigue in the neck and the shoulders, especially with the extra weight of ballistic helmets and NODs.

Unity Tactical FAST Mount Aimpoint (4)

Included within the Micro-footprint mounts are built-in fully-adjustable iron sights. The peep sight is adjustable for windage and it is possible to use a front sight post adjustable in elevation.
Because both elements are contained within the mount the sight radius is very short (1″) but it is certainly effective as a backup with all those platforms on which there isn’t any rail surface available for standard sights (Ideal for SMG and PDW with mission critical devices such as IR lasers / lights).
Short, but better than nothing.

$ 169 Learn More

FAST FTC Aimpoint Mag Mount

Unity Tactical FAST Mount Aimpoint (4)

The Unity Tactical FAST FCT Aimpoint Magnifier Mount brings the optic unit at the correct height of 2.26″ centerline. It is designed for the 30mm magnifier and it will soon be available for the EoTech G33.
The extra height allowed to solve a very common and annoying issue with magnifiers. Instead of flipping the optic unit to the side, creating a snag hazard for close quarters and gear, the FAST FTC Mag Mount flips down, maintaining everything within the weapon’s footprint.
There are no switches, buttons or levers; only a 15 pound force to overcome. A very intuitive and rugged hinge design.

Unity Tactical FAST Mount Aimpoint (4)

$ 198 – Learn More

FAST Riser

Unity Tactical FAST Mount EOTECH Magnifier (1)

In the attempt to solve the same issue for most Red Dot sights on the market, Unity Tactical had to use a different approach for any “block” style sight. This solution has been utilized in the past in similar fashions but Unity Tactical’s integration with the Optic/Magnifier/BUIS/AimingDevices ecosystem has been unique and innovative.

Unity Tactical FAST Mount EOTECH Magnifier (1)

The Riser accomplishes mainly two goals:
1) lift the centerline at 2.26 inches, ideal for previously mentioned uses and for integration with the FAST FTC Mag Mount.
2) Integrated Rear Flip-up sight, to allow for side mounting Back Up Iron Sights directly to the raiser itself, without losing any rail space for dedicated 1913 45° mounts.

Unity Tactical FAST Mount EOTECH Magnifier (1)
Unity Tactical FAST Mount EOTECH Magnifier (1)

The FAST Riser is compatible with EoTech EXPs, Leupold LCO, Vortex UH1 Wilcox BOSS 300 and other sights with similar specs and dimensions.

$ 88 Learn More

FAST Scope Mount

Unfortunately we weren’t able to take a photo on the show floor but here are some details.
The mount has a centerline of 1.93″. It will be available for 30 mm and 34mm tube diameters and with 0 and 20 MOA cant.
The main innovative feature is the modularity of it and how it integrates more weapon’s accessories into very little space (not unexpected from Unity Tactical).
Different modules will be able to bolt on to the side of the mount allowing to add either small Red Dot sight for CQB (Micro, RMR, DPP, ACRO P1…) or BUIS.
The Unity Tactical signature is in the thought process behind these modules: they are designed to have a very ergonomic offset but they are also slightly lifted to be able to clear the BE.Meyers MAWL mounted in the front.
All made in 7075-T6 Aluminum with type 3 hard-coat anodize.

Below is the image of the BUIS module bolted to the RISER for the EoTech EXPs.

Unity Tactical FAST Mount EOTECH Magnifier (1)

HOT Button

This is a remote switch that mounts directly on the M-Lok rail.

This very ergonomically efficient 45 degree switch allows for momentary or constant on activation with a clickable button.
It is compatible with Surefire, Streamlight and laser cables (ATPIAL-c, AN/PEQ-15, DBAL, MAWL…).

SPARK

Unity Tactical has expanded their offering for the SPARK light for 2019.
SPARK will soon be available in Red, Blue, Green, IR and SWIR.
The light is completely enclosed and it is not reusable, but with 200 hour runtime and an MSRP of 12.99 it is a very effective and affordable solution for Mil/LE, USAR and First Responders.
The light is backed with hook tape and it is sold with an adhesive patch of loop tape.

Learn More

CLUTCH Belt

Unity Tactical Clutch Belt
Unity Tactical Clutch Belt
Unity Tactical Clutch Belt
Unity Tactical Clutch Belt
Unity Tactical Clutch Belt

Learn More

FUSION

Unity Tactical  WILCOX FUSION

Learn More

KNUCKLE

Learn More

MARK

Learn More

MARK + REMORA

Learn More

Aimpoint ACRO Red Dot Sight

Aimpoint has released the ACRO (Advanced Compact Reflex Optic), displayed today here at Eurosatory 2018 in Paris.

SHOT Show 2018 | Aimpoint

Aimpoint CompM5

Made of high-strength aluminum and design to be extremely rugged, especially when subject to high G-forces during impacts, the new Aimpoint  CompM5 is a miniaturized version of the CompM4. The AAA battery is capable of powering the 2 MOA dot for 50,000 hours (over 5 years). Aimpoint CompM5 First Spear Range Day SHOT Show 2018

Aimpoint CompM5 and 6x Magnifier SHOT Show 2018 Industry Day at the Range (8)

Read More…

SHOT Show 2018 | First Spear Range Day

First Spear

Multi Mag Pouch, a rifle and pistol compatible pouch that can be adjusted to securely hold most kinds of rifle mags, from 308 to 223.  With the addition of the pistol mag inserts the pouch can hold pistol pouch with a high degree of customization in terms of position and mag exposure.

Oakey SI

New PRIZM Grey lens. Same extreme high quality and clarity of image from the PRIZM line but without any tint.
The lens provides a very crisp and rich-toned image while keeping, even in the very first moments, a true-to-life color perception.
At the First Spear Range Day the PRIZM Grey was shown mounted on an M-Frame 2.0

Triarc Systems

Probably some of the most smooth shooting AR platform in the combat category.

1911

Very well balanced 1911, quick and accurate follow-up shots with an easily manageable recoil.

OpsCore

Revac USA

Showing us some tactical rope access, egress and casualty evacuation with very effective methods and tools.

This thigh-mounted pouch, made by First Spear, is designed to hold +100 ft of rope for repelling and evacuation, a compact and light weight package ideal for application in elevated urban environments.

CORE Survival

Aimpoint

Beyond Clothing

TMG Target Systems

 

ShotShow2016: Industry Day at the Range

KRISS USA – SPHINX

01Kriss01P

KRISS Vector GEN II CRB Enhanced 9×19 in Combat Grey (w/ Trijicon MRO)

01Kriss02P

KRISS Vector GEN II SBR 9×19 in Combat Grey

01Kriss04P

KRISS Vector GEN II SMG 9×19 in FDE (w/ Trijicon MRO)

SPHINX SDP Compact Sand Duty 17rds 9x19

SPHINX SDP Compact Sand Duty 17rds 9x19

SPHINX SDP Compact Sand Duty 17rds 9×19

01Kriss07P

SPHINX SDP Standard Black 17rds 9×19

SILENCERCO

Silencerco Handgun

SilencerCo Maxim 9 (featuring Glock magazine)

02Silencerco02P

Omega Titanium Rifle Suppressor

Osprey Micro Rimfire Suppressors

Osprey Micro Rimfire Suppressors

02Silencerco05P

Hybrid Suppressor

Hybrid Suppressor: compatible with calibers ranging from 5.56mm to 9mm, .45–70 GOV to .458 SOCOM

SilencerCo Omega 9K

SilencerCo Omega 9K

Omega 9K Suppressor: 9mm and 300 BLK

 DANIEL DEFENSE

Daniel Defense Daniel Defense

Integrally Suppressed AR-15 featuring light-weight KeyMod rail.

Daniel Defense

AR-15 featuring Magpul M-Lok platform

Daniel Defense

Leupold 

Leupold D-EVO

D-EVO and LCO Setup

IWI

IWI Galil ACE

IWI Galil ACE

IWI x95

IWI x95 in Olive Green

IWI Tavor

IWI Tavor in FDE

COBALT KINETICS

Cobalt Kinetics B.A.M.F. OD/Black

AIMPOINT

Aimpoint Micro T2 w/ Magnifier

Aimpoint Micro T2 w/ Magnifier

Aimpoint Micro  T-2 with Magnifier

Aimpoint CompM4

Aimpoint CompM4

BARRETT

Barrett MRAD

Barrett 98 B

Barrett 98 B

Barrett MRAD

08Barrett02P

Barrett REC7 Gen 2

CMMG

CMMG Mutant 47

CMMG Mutant 47

FN Herstal USA

FNH M249 s

FNH M249 semi-auto civilian ready belt-fed

FNH M240 B

FNH M240B

Heckler & Koch

HK MR762

Heckler & Koch MR762

Kinetic Development Group | 2015 Update

Kinetic Development Group has been releasing a lot of great new products in the last few months. They have been focusing mainly on the FNH Herstal SCAR platform, diversifying from most of the other firearm accessories manufacturers on the market. We have already introduced you to the SCAR Adaptable Stock (SAS) a few months ago. Since then KDG has released  some other interesting products both for the SCAR and AR platform (technically any platform thanks to the Magpul M-LOK system [Read our article]). They started by providing the FN SCAR operator an alternative extended aluminum rail system that would provide the same customization and attachment options as most ARs do, this is the MREX (Modular Receiver EXtention).

KDG-MREX-Outdoor_16SMALL KDG-MREX-Outdoor_20SMALLKDG-MREX-Outdoor_60SMALL

KDG has also released in the past few moths a new mounting system based on the M-Lok platform: the Kinect QD. This line of Quick-Detach mounts allows the operator to change and swap accessories on the weapon within seconds.  There are two spring-loaded wedges in the base of the Kinect™ mounting point. When you press the accessory or rail section down in the MLOK™ slot, two tiny deployment triggers get pressed against the rail firing the wedges into place. There is nothing more frustrating that fiddling with an allen wrench (if you can find it) to get your accessories on an off your weapon with traditional modular rail sections. This changes the whole dynamic of the MLOK™ system and really makes every accessory truly removable with the ability to mount it in a second when needed. Due to the high quality materials and engineering skills this system does not fear recoil or hard use.

KDG-Spring2015-Studio_87-SMALL KDG-Spring2015-Studio_95-SMALL KDG-Spring2015-Studio_99-SMALL KDG-Spring2015-Studio_101-SMALL UNIVOFFSET5 

The last product line KDG has released is the Sidelock Optic Mounts. The first one to arrive on the market was designed for the Aimpoint Comp M4. The patented cam system locks the mount down onto picatinny without the need of tools, side levers, or huge knobs. The release system allows users to change out their optics on the fly with less hassle. The 3 levels of locks insure the optic will not move unintentionally, maintaining zero for the shooter, and returning to zero when remounting in the same position after removal. They have now released two other optics mounts: the Sidelock Universal Scope Riser (that features a plain 1913 rail system) and the Sidelock Aimpoint Micro Mount.

KDG-Spring2015-Studio_16-SMALL KDG-Spring2015-Studio_58-SMALL1 KDG-Spring2015-Studio_75-SMALLFullSizeRender-21 

 

 

Magpul | MLok Tripod Adapter

MAG624-Magpul Mlok Tripod Adapter

The M-LOK Tripod Adapter for metal M-LOK compatible hand guards or forends mounts directly onto any tripod head equipped with the common Manfrotto RC2/Q2 interface. This adapter allows the user to mount their rifle directly to a tripod head without the use of any additional saddles giving them a secure shooting platform.

MAG624-M-Lok-Tripod-Adapter-Mounted

The M-LOK Tripod Adapter is machined from aluminum and finished in Mil-Spec anodizing which offers excellent corrosion resistance. The beveled ends and corners produce a minimal footprint allowing the user to keep the M-LOK Tripod Adapter attached to the weapon system at all times with minimal snagging hazards.

Made in U.S.A.

MAG624-MLOK-Tripod-Adapter-Rifle-1

FEATURES

  • Compatible exclusively with Manfrotto products using RC2/Q2 rapid connect adapter
  • Directly mounts to metal M-LOK hand guards and forends (not intended for use with polymer hand guards or forends)
  • Cammed T-Nuts
  • Mil-Spec anodized aluminum
  • Compact and low profile, covers only two M-LOK slots
  • Beveled ends and corners
  • Recoil/impact mitigation lugs

MAG624-M-Lok-Tripod-Adapter-Close MAG624-MLOK-Tripod-Adapter

Haley Strategic releases FlatPack

The Haley Strategic Partners D3 FlatPack is an expandable compact assault pack. Designed with a unique expandable gusset system, the D3 FlatPack is an assault pack that can go from an almost flat profile when compressed to 600 cubic inches when completely expanded. It is Available in four different colors: Black, Coyote, Multicam and Ranger Green. Haley Strategic Partners HSP FlatPack Black Coyote Multicam Ranger Green 02 In its compressed state, the D3 FlatPack can run a 1 liter hydration bladder in the main compartment with additional small items like batteries, energy gels and chem lights stored in the dedicated admin chamber.  Expanded, the main compartment can fit a fully loaded D3CR, a helmet or a jacket while the admin can fit electronics and/or small binoculars. Haley Strategic Partners HSP FlatPack Black Coyote Multicam Ranger Green 04 The FlatPack integrates with a D3CR or D3CR-H, replacing the H harness with the pack straps, to create a light reconnaissance, patrol or an EDC worst case scenario rig. The FlatPack will also molle into any PALS based nylon system including plate carriers, assault vests or other packs with external PALs webbing. Haley Strategic Partners HSP FlatPack Black Coyote Multicam Ranger Green 05 Haley Strategic Partners HSP FlatPack Black Coyote Multicam Ranger Green 05 Although designed with the Special Operations end user in mind, the D3 FlatPack also makes an excellent everyday pack for civilians looking for a very compact carry bag that doesn’t scream military. Able to safely transport electronics such as the iPad, MacBook (12″) or any laptop or tablet up to 8″ x 12″, the padded inner chamber can also hold a number of items ranging from books and periodicals to digital cameras. Haley Strategic Partners HSP FlatPack Black Coyote Multicam Ranger Green 03 MacBook

The D3 FlatPack can hold the HSP D3CR making it a very compact and reliable pack to carry a chest rig in a covert situation. During the transition from covert to overt, one the D3CR is deployed, the operator is able to slim back down the pack and integrate it with the chest rig, making this system a great site exploitation bag. Haley Strategic Partners HSP FlatPack Black Coyote Multicam Ranger Green 06 haley strategic hasp flatpack flat pack Materials and Weight:
500D Cordura Mil-Spec nylon
16 ounces

Main Compartment:
200 cubic inches expandable to 600 cubic inches
Computers (max size 8″x 12″) will fit when fully compressed

Admin Compartment:
50 cubic inches that can also be expanded to 100 cubic inches

Integration:
With the HSP D3CR to create a patrol system
Any PALs based systems (such as plate carriers)

Berry Compliant:
Berry Amendment (10 U.S.C. 2533a) compliant as implemented by DFARS Haley Strategic Partners HSP FlatPack Black Coyote Multicam Ranger Green 09 Haley Strategic Partners HSP FlatPack Black Coyote Multicam Ranger Green 10 Haley Strategic Partners HSP FlatPack Black Coyote Multicam Ranger Green 08

Sig launches Sig Sauer Silencers

Every shooter should enjoy the hearing safety, reduced felt recoil and optimized overall experience of a silenced firearm, whether at the range or on a hunt. SIG SAUER is committed to making silencers accessible to more shooters by advancing silencer legislation and by increasing the affordability of silencers through smarter engineering and design.

Sig Sauer Silencers Introducing Taper-Lok™—a next-generation technology, exclusive to SIG SAUER Silencers. This innovative, three-piece system is built for speed, accuracy and repeatability over time.  Modular design allows for simple and economical changes to your muzzle configuration. Integrated wrench flats mean no ratchet teeth to wear out or damage. Provides the least zero-shift even through multiple install/removal cycles. Sig Sauer Silencers For each caliber Sig Sauer allows the operator to chose between the different attachment systems, materials and dimensions; making each and every suppressor suited for the job. Sig Sauer, as for now, provides the user six different caliber: 5.56, 7.62 and .338 LM, .22, 9 mm and .45 ACP. Sig Sauer Silencers

Rugged, 17-4 stainless steel baffles are enclosed by a titanium tube for leading durability and the lightest pistol silencers available. The interchangeable baffles allow for easy silencer assembly and maintenance. The most common standard and metric pistons are included in every box, allowing you to use the same silencer on a full arsenal of host pistols. Sig Sauer Silencers

Sig Sauer Silencers will be soon available for a very reasonable price. Maybe this time your wife won’t be so upset we she finds out how much you spent on your AR.