Sig launches Sig Sauer Silencers
Every shooter should enjoy the hearing safety, reduced felt recoil and optimized overall experience of a silenced firearm, whether at the range or on a hunt. SIG SAUER is committed to making silencers accessible to more shooters by advancing silencer legislation and by increasing the affordability of silencers through smarter engineering and design.
Introducing Taper-Lok™—a next-generation technology, exclusive to SIG SAUER Silencers. This innovative, three-piece system is built for speed, accuracy and repeatability over time. Modular design allows for simple and economical changes to your muzzle configuration. Integrated wrench flats mean no ratchet teeth to wear out or damage. Provides the least zero-shift even through multiple install/removal cycles. 
For each caliber Sig Sauer allows the operator to chose between the different attachment systems, materials and dimensions; making each and every suppressor suited for the job. Sig Sauer, as for now, provides the user six different caliber: 5.56, 7.62 and .338 LM, .22, 9 mm and .45 ACP. 
Rugged, 17-4 stainless steel baffles are enclosed by a titanium tube for leading durability and the lightest pistol silencers available. The interchangeable baffles allow for easy silencer assembly and maintenance. The most common standard and metric pistons are included in every box, allowing you to use the same silencer on a full arsenal of host pistols. 
Sig Sauer Silencers will be soon available for a very reasonable price. Maybe this time your wife won’t be so upset we she finds out how much you spent on your AR.
https://www.youtube.com/watch?v=vGYlsPW8UJI
Kinetic Development Group | SCAR Adaptable Stock
The new Kinetic SAS kit takes the amazing Magpul designed Masada (ACR-E) stock system and allow for direct use with your SCAR platform rifle. Stock ships fully assembled with SCAR adapter for drop in use.
Just a few months ago, Kinetic Development Group launched its company with the promise to bring solutions to the small arms market existing with high quality firearms. They started with the FN SCAR as many SCARs are deployed with our Special Operations Forces. They also recognize the 16S and 17S are increasingly popular with American shooters and law enforcement.
Their first products, the MREX (modular rail extensions) for the front end of the SCAR has been very popular. The KDG front and rear sling points have also brought the SCAR into the year 2015 as far as QD sling solutions go. Well, they have just addressed another common complaint about SCAR. Some refer to it as the SCAR’s “UGG Boot” like stock system.
SAS kits come standard with 7 positions of length adjustment, cheek weld height adjustment, an AMBI QD sling attachment point, a weatherproof battery compartment, and a side-folding feature. Like the factory stock, the weapon can be fired with the stock folded. KDG also added an optional set-screw to allow users the option to eliminate any play between the stock and receiver.
The stock and adapter comes fully assembled from KDG. There are no tools required to install on your SCAR! The whole system retails for $299.00 and can be purchased at www.kineticdg.com or a dealer listed near you found on their website.www.kinetidg.com/dealers
SHOT2015 | New Products from MAGPUL
This year at SHOT Show Magpul has released some very interesting products. The first segment is dedicated to the “marriage” between Uncle Sam and Mother Russia with the release of some new rifle furniture for AKs.
Magpul ZHUKOV-S Stock
The Magpul Zhukov-S Stock is a no-compromise folding stock for the modern AK. The Zhukov-S Stock casts aside traditional AK stock shortcomings and offers a folding, collapsible stock with QD sling mounts, modular Cheek Risers, and a shock-absorbing rubber butt-pad for superior traction. The Zhukov has right-side folding for compatibility with side-mounted optics. Designed to fit most common stamped AK receivers without modification via a unique wedge block, the durable injection molded polymer Zhukov-S Stock redefines the human interface with the AK platform. 
Magpul MOE AK Stock
Providing Magpul construction and ingenuity to the venerable AK platform, the Magpul MOE AK Stock is an optimized fixed stock for most stamped-receiver rifles. Featuring the unique wedge block fitment of the Zhukov-S Stock, the MOE AK Stock provides internal storage, optimized QD sling swivel placement, a shock absorbing rubber butt-pad for positive placement, and user-selectable snap on Cheek Risers.
Magpul PMAG D-60 AR/M4
The PMAG D-60 is a durable, lightweight, highly reliable 60-round 5.56×45 NATO/.223 Remington polymer magazine for AR15/M4 compatible weapons. With a larger capacity than previous PMAGs, the PMAG D-60 gives the shooter 60 rounds of ammunition, effectively allowing the same round count as two standard capacity 30-round magazines without requiring a critical reload. The unique drum configuration keeps the height of the magazine manageable as well, allowing prone firing and easier storage. Features a paint pen dot matrix for easy marking and a rear window for instant capacity indication. Compatible with a wide range of NATO firearms such as the M4, M16, SCAR MK16/16S, HK416, MR556, M27 IAR, and others. 
Magpul PMAG GL9 – Glock 17
The PMAG 17 GL9 is a 17-round magazine featuring durable polymer construction, paint pen dot-matrix for labeling, tool-less floor plate removal for ease of maintenance, and a visible capacity indicator hole on the body. The PMAG 17 GL9 is compatible with all full-size 9mm Glock handguns, as well as compact and sub-compact variants with some protrusion below the grip. 
Magpul HUNTER 700 Stock
Made from reinforced polymer and a machine finished, anodized A380 cast aluminum bedding block, the Magpul Remington 700 Hunter Stock offers users a fully adjustable length of pull, comb height, and enhanced ergonomics. Compatible with all Remington 700 Short Actions, this stock requires no bedding and is a true “drop-in” solution for the end user. This stock is also M-LOK compatible to accept a broad range of accessories. Also available is our Bolt Action Magazine Well, which allows the rifle to be used with detachable box magazines without the need for custom inletting. 
The Leupold D-EVO | Dual Enhanced View Optic
The D-EVO is a 6×20 fixed power prism optic which uses mirrors and lenses to get the job done. It could be used stand alone but it’s meant to be used in conjunction with a Red Dot Sight.
Developed over the last year, the Dual-Enhanced View Optic has many features being considered for the Army’s future Squad Common Optic. Leupold chose to integrate the Close Mid-Range Reticle with Wind holds (CMR-W) from the popular MK6 line (7.62 version below for illustration). It offers bullet drop to 600m as well as windage but this version uses averages for 5.56 and 7.62 cartridges. It offers up to 50 mils of windage and elevation adjustment with 0.1 mil increments per click of the dials.
The D-EVO is 2″ tall, 4.6″ long, taking up only 3.2″ of rail space due to its mount. It weighs 13.8 oz and is waterproof to 66 feet.
The photo above is looking out at about 200m while the image below is at 100m. 
Credit: Leupold Optics, Soldier Systems
Haley Strategic Partners | The D3CR Heavy
Haley Strategic Partners has just released the Disruptive Environments Chest Rig Heavy. This new chest rig will allow a more mission specific set up for those who operate with a 308 platform while having the same slickness and low profile of an HSP soft good.
The D3CR-H addresses the same mission as the original D3CR, but has been slightly redesigned to support .308 platforms. Optimized for work in urban, vehicle, rural and other confined settings, the Disruptive Environment Chest Rig was built to be worn as a stand alone system with a detachable H-harness or clipped into a armor platform equipped with a quick release system.
When run as a stand alone, the platform is low profile enough to be worn fully loaded and not print on a normal/loose fit jacket or sweatshirt. When run on a armor platform with a quick release system, such as SwiftClips™, it can be attached or stowed in seconds, giving the end user the versatility to transition from low vis to high vis or vice versa.
The rig intentionally does not include a radio or dedicated full size medical pouch so no matter the posture, essentials such as communications and medical kits can remain on the end user at all times. The D3CR-H is also compatible with the Haley Strategic D3 Expansion System allowing the end user to add features including the holster wedge or multi-mission hanger pouch.
The rifle magazine pouches accept almost any .308 magazine. The Multi-Mission Pouches accept 1911, Glock, Sig, M&P, XD and other standard double or single stack pistol magazines, as well as many handheld lights and multi-tools.
The system features:
4 .308 Magazine Pouches with Hypalon® magazine retention tabs (Pouches support SR25, SCAR, FAL, AR10, M14, Lancer Systems, PMAG LR)
2 Multi-Mission Pouches with Hypalon magazine retention tabs (Fits standard double and single stack pistol magazines as well as other equipment including flashlights and multi-tools)
Zipper GP Pouch (Medical, compass, GPS, phone, batteries and other various small electronics)
Zipper Tool Pouch (Includes elastic keepers for more mission specific essentials, such as Kestrel wind meters, ballistic calculators, dope cards, batteries, tools and various electronics).
The D3CR-Heavy will be available in early December in Coyote and Multicam for $179.
S&S Precision | Introducing the 757 and GRT System
S&S Precision has released a couple of very interesting products in the past few days. They have enhanced their apparel line with a patent pending pant/pistol retention system: the 757. The other system they have introduced is the Gear Retention Track, which allows the operator to attach the SMR (Skeletonized Magazine Retention) directly to the Molle webbing, a belt or even in a kangaroo pouch. 
Read More…
Magpul M-LOK System
HISTORY
In late 2007 Magpul Industries Corp developed the Masada Concept Rifle that featured a polymer hand guard with three elongated vent holes that acted as a negative mounting surface for accessory rails.
These slots became one of the first “negative space” attachment systems that allowed the user to put mounting rails only where they were needed, as opposed to covering the entire surface with mounting rails, which are then covered with panels. The system also
allowed direct mounting of accessories, such as fore-grips and flashlights, with no rail interface needed.
In 2009 the MOE hand guards for the common AR15/M16 firearms were released, bringing the same slot system, along with rails, flash light mounts, grips and other accessories to the mainstream.
In the years since the MOE slot system has been released, several million MOE slot compatible accessories have been produced. Initially introduced as a Magpul-specific system, several other companies have built MOE slot compatible accessories in the years
since its release.
The MOE system was never officially released as an open standard, and the requirement to have access to the back side of the mounting surface limited its application.
Additionally, depending on the accessory item, the spacing increments were not always small or uniform enough for desired placement. These characteristics made MOE slots and accessories less ideal to use with free-float hand guards, which did not allow
back side access to the mounting surface. Rather than documenting and publishing the existing MOE slot information and weld nut system, Magpul engineers used this opportunity to substantially improve the feature set of the MOE system. The result is the M-LOK.
M-LOK
M-LOK stands for Modular Lock system. The M-LOK system retains an elongated slot appearance, similar to MOE slots (with different dimensions). The new slot is larger, has squared sides, and the new system adds the following feature set: M-LOK
• DIRECT MOUNT CAPABILITY
• CAMMED T-NUT
• OPTIMIZED FOR METAL AND POLYMER MANUFACTURING
• RECOIL/IMPACT MITIGATION LUGS
• INTERMEDIATE SPACING OPTION
• MULTI-DIRECTIONAL MOUNTING
• BACKWARDS MOE COMPATIBILITY
FEATURES
DIRECT MOUNT CAPABILITY
Accessories are mountable directly from the front face of the slot. No access from the rear of the system is needed.
CAMMED T-NUT
The M-LOK direct attachment system features a custom, cammed T-Nut that positions the T-Nut consistently for installation and removal. Simply adjust the gap between the T-Nut and accessory to match the thickness of the mounting surface, align the T-Nuts
with the slot, and insert in the desired location. An initial ¼ to ½ turn of the screw for each T-Nut rotates the nut into engagement and then you may tighten normally.
OPTIMIZED FOR METAL AND POLYMER MANUFACTURING
Simple, rounded, rectangular slots with no sharp edges, complex geometry, or undercuts make the M-LOK slots optimal for high volume metal and polymer manufacturing
The M-LOK slots require no special cutters or angle gauges in the manufacturing process. With injection molding, the lack of an undercut allows simple mold design. All of this results in the lowest manufacturing costs possible.
RECOIL/IMPACT MITIGATION LUGS
Accessories feature recoil mitigation lugs with full recoil lug support in all 4 axes of movement, preventing movement of the system under recoil or rough handling, allowing repeatable accuracy in removal and reinstallation.
INTERMEDIATE SPACING OPTION
M-LOK accessories can be direct mounted entirely within a slot or bridging between/across slots, making the adjustment interval smaller than the size of a single slot. (Intervals equal two Picatinny rail slots (20mm) of adjustment). Full, 4 axis recoil lug support is maintained at every interval.
MULTI-DIRECTIONAL MOUNTING
Accessories can be mounted facing toward the front or the rear (180 degrees difference), with full recoil lug support—the system does not need to be oriented in a specific direction to function properly.
BACKWARDS MOE COMPATIBILITY
In addition to the soon-to-be released, dedicated M-LOK accessory line, current MOE accessories will work with the M-LOK slots via an adapter plate, giving the M-LOK system access to millions of accessories already fielded for the MOE system.
Urban Survivor Blog 
