The Haley Strategic D3CR (or Disruptive Environments™ Chest Rig) has been, since its first release, one of the most adaptable and versatile Chest-Rigs on the market. After the release of the first version that allows to carry 4 rifle magazines (both STANAG and AK 7.62 x 39mm and 5.45 x 39mm) they have focused on the 7.62 NATO and 308 market with the D3CR-Heavy. These products have always shared many features in their designs, both structural and pouches placement.
With the latests addition in the line HSP will provide the user with a parallel option to the original D3CR.
The new Disruptive Environments™ Chest Rig X mainly features a different configuration of storage capabilities; they have substituted the bungee multi-purpose pouch with two Multi-Mission pouches. This modification creates a much more streamlined set-up and provides the user with more options -regarding the carry of multi-tools, hand-held flashlights and sidearm magazines. The Multi-Mission pouch houses magazines of the most popular single-stack and double-stack handguns keeping very good retention with both a bungee cord and a magnet.
The new chest rig borrows the X nomenclature by the new X-shaped harness design; conceived for added comfort in prolonged uses and for further user-adjustably. The D3CRX does not preclude the use of any Haley Strategic Accessories.
The D3CRX is available in Black and Tan for $180 and in Multicam and Multicam Black for $ 185.
The Haley Strategic Partners D3 FlatPack is an expandable compact assault pack. Designed with a unique expandable gusset system, the D3 FlatPack is an assault pack that can go from an almost flat profile when compressed to 600 cubic inches when completely expanded. It is Available in four different colors: Black, Coyote, Multicam and Ranger Green. In its compressed state, the D3 FlatPack can run a 1 liter hydration bladder in the main compartment with additional small items like batteries, energy gels and chem lights stored in the dedicated admin chamber. Expanded, the main compartment can fit a fully loaded D3CR, a helmet or a jacket while the admin can fit electronics and/or small binoculars. The FlatPack integrates with a D3CR or D3CR-H, replacing the H harness with the pack straps, to create a light reconnaissance, patrol or an EDC worst case scenario rig. The FlatPack will also molle into any PALS based nylon system including plate carriers, assault vests or other packs with external PALs webbing. Although designed with the Special Operations end user in mind, the D3 FlatPack also makes an excellent everyday pack for civilians looking for a very compact carry bag that doesn’t scream military. Able to safely transport electronics such as the iPad, MacBook (12″) or any laptop or tablet up to 8″ x 12″, the padded inner chamber can also hold a number of items ranging from books and periodicals to digital cameras.
The D3 FlatPack can hold the HSP D3CR making it a very compact and reliable pack to carry a chest rig in a covert situation. During the transition from covert to overt, one the D3CR is deployed, the operator is able to slim back down the pack and integrate it with the chest rig, making this system a great site exploitation bag. Materials and Weight:
500D Cordura Mil-Spec nylon
200 cubic inches expandable to 600 cubic inches
Computers (max size 8″x 12″) will fit when fully compressed
50 cubic inches that can also be expanded to 100 cubic inches
With the HSP D3CR to create a patrol system
Any PALs based systems (such as plate carriers)
Haley Strategic Partners has just released the Disruptive Environments Chest Rig Heavy. This new chest rig will allow a more mission specific set up for those who operate with a 308 platform while having the same slickness and low profile of an HSP soft good.
The D3CR-H addresses the same mission as the original D3CR, but has been slightly redesigned to support .308 platforms. Optimized for work in urban, vehicle, rural and other confined settings, the Disruptive Environment Chest Rig was built to be worn as a stand alone system with a detachable H-harness or clipped into a armor platform equipped with a quick release system.
When run as a stand alone, the platform is low profile enough to be worn fully loaded and not print on a normal/loose fit jacket or sweatshirt. When run on a armor platform with a quick release system, such as SwiftClips™, it can be attached or stowed in seconds, giving the end user the versatility to transition from low vis to high vis or vice versa.
The rig intentionally does not include a radio or dedicated full size medical pouch so no matter the posture, essentials such as communications and medical kits can remain on the end user at all times. The D3CR-H is also compatible with the Haley Strategic D3 Expansion System allowing the end user to add features including the holster wedge or multi-mission hanger pouch.
The rifle magazine pouches accept almost any .308 magazine. The Multi-Mission Pouches accept 1911, Glock, Sig, M&P, XD and other standard double or single stack pistol magazines, as well as many handheld lights and multi-tools.
The system features:
4 .308 Magazine Pouches with Hypalon® magazine retention tabs (Pouches support SR25, SCAR, FAL, AR10, M14, Lancer Systems, PMAG LR)
2 Multi-Mission Pouches with Hypalon magazine retention tabs (Fits standard double and single stack pistol magazines as well as other equipment including flashlights and multi-tools)
Zipper GP Pouch (Medical, compass, GPS, phone, batteries and other various small electronics)
Zipper Tool Pouch (Includes elastic keepers for more mission specific essentials, such as Kestrel wind meters, ballistic calculators, dope cards, batteries, tools and various electronics).
The D3CR-Heavy will be available in early December in Coyote and Multicam for $179.
S&S Precision has released a couple of very interesting products in the past few days. They have enhanced their apparel line with a patent pending pant/pistol retention system: the 757. The other system they have introduced is the Gear Retention Track, which allows the operator to attach the SMR (Skeletonized Magazine Retention) directly to the Molle webbing, a belt or even in a kangaroo pouch. Read More…
The D3CR Expansion System (D3X) was built to better fit the need of an end user who needs to quickly adapt between different dynamic situations.
HSP developed the D3CR Expansion system with the idea of extending the capability of the operator, without sacrificing the low profile footprint of the D3CR.
The D3X consists of three items available in Black, Coyote and MultiCam:
Attaching seamlessly to the hook panel on the back of every D3CR, the components can be used individually or pancaked into a Holster/Hanger or Double Mag/Hanger combo. These components will work on the stand-alone rigs, as well as when clipped into any plate carrier using the Velocity Systems Swift Clip Attachment System, ideally armor carriers made by Velocity Systems and Mayflower Reasearch & Consulting.