Tag Archive | Team Wendy

SHOT Show 19 | Team Wendy

A protective clip-on mandible will soon be available from Team Wendy. The first iteration will only be available with ballistic protection and will fit Ballistic EXFIL 3.0 helmet.

Team Wendy SHOT Show 2019 Exfil Mandible Carbon Ballistic Visor Multicam

The mandible will clip on in a dedicated slot of the rail and it will not interfere with visors and/or helmet mounted accessories with the exception of rail mounted hearing protection / comms.

With the ballistic visor applied, the mandible add protection from both the frontal sector as well as from the sides. A key feature is in fact the impact/ballistic protection added to the ears.

Team Wendy SHOT Show 2019 Exfil Mandible Carbon Ballistic Visor Multicam (1)
Team Wendy SHOT Show 2019 Exfil Mandible Carbon Ballistic Visor Multicam
Read More…

IWA 2018 | Team Wendy

EXFIL® Ballistic SL Helmet

Helmet shown with:
– EXFIL® Ballistic Ear Covers
– EXFIL® Ballistic Visor

Ear Covers Ballistic Performance:
NIJ Level IIIA (according to NIJ STD 0108.01 / 0101.06; stops 9mm FMJ RN, .357 SIG FMJ FN, and .44 Magnum SJHP)

Visor Ballistic Performance:
Exceeds impact, fragmentation and optical requirements of Military Combat Eye Protection (MCEP) Class 2 in accordance with MIL-PRF-32432(GL), 9 January 2013
MCEP requirements include meeting ANSI Z87.1 2010

The EXFIL® Ballistic Visor with ESS Lens Technology is a low profile, lightweight visor system that mounts quickly and tool-free to the front section of the EXFIL® SL Rail. It quickly adjusts into three preset positions (down, up and stowed back), and provides clearance for NVG mounts when in the stowed position. Frame available in Black, Coyote Brown and Ranger Green.

 

Team Wendy EXFIL Ballistic 

Helmet in the picture below shown in Multicam colorway set up with:
– EXFIL® Peltor™ Headset Adapter
– EXFIL® Oxygen Mask Strap Kit
– CORE Survival Helstar strobe
– MOHOC Helmet Camera.

EXFIL® Carbon Helmet spottet at the Princeton Tec booth

EXFIL® SAR TACTICAL

The EXFIL® SAR is the first purpose built Search and Rescue helmet to provide tactical accessory mounting capabilities, including a standard NVG shroud, while meeting key industrial and mountaineering performance standards. The EXFIL® SAR Tactical is optimized for use with night vision devices, it features a machined aluminum Wilcox® NVG shroud. The helmet also includes a 4-point CAM FIT™ retention system with chin cup for optimal stability and a Boa® Closure System to dial in precise fit adjustment while providing single-handed quick release.

ShotShow2016: TNVC

Tactical Night Vision Company is the most reputable night/thermal vision company on the market. They are truly experts on the matter, here is part of our experience at their booth. Enjoy

Shot Show 2016 TNVC Tactical Night Vision Company Shot Show 2016 TNVC Tactical Night Vision Company Shot Show 2016 TNVC Tactical Night Vision Company Shot Show 2016 TNVC Tactical Night Vision Company Shot Show 2016 TNVC Tactical Night Vision Company Shot Show 2016 TNVC Tactical Night Vision Company Shot Show 2016 TNVC Tactical Night Vision Company Shot Show 2016 TNVC Tactical Night Vision Company Shot Show 2016 TNVC Tactical Night Vision Company

 

This is the new M-TEK Flux Carbon helmet. It features M-Lok rails, Wilcox L4 Shroud and a new shape for enhanced protection and comfort. Shot Show 2016 TNVC Tactical Night Vision Company Shot Show 2016 TNVC Tactical Night Vision Company Shot Show 2016 TNVC Tactical Night Vision Company Shot Show 2016 TNVC Tactical Night Vision Company

Here is their line of weapon mounted visors, both thermal and night vision. Shot Show 2016 TNVC Tactical Night Vision Company Shot Show 2016 TNVC Tactical Night Vision Company Shot Show 2016 TNVC Tactical Night Vision Company Above is their new weapon mounted dual-switch that works with 1913 rails and Keymod or M-Lok sections.

Shot Show 2016 TNVC Tactical Night Vision Company Shot Show 2016 TNVC Tactical Night Vision Company Shot Show 2016 TNVC Tactical Night Vision Company Shot Show 2016 TNVC Tactical Night Vision Company Shot Show 2016 TNVC Tactical Night Vision Company Shot Show 2016 TNVC Tactical Night Vision Company Shot Show 2016 TNVC Tactical Night Vision Company

For more info please visit tnvc.com

 

BCM | 300 Blackout

Bravo Company Manufacturing has released a full line of 300 Blackout carbines and upper receivers. With this latest addition, BCM has officially entered the 300 blk segment of the firearm industry. The many similarities in the components of the weapon platform between .223 (or 5.56) and 300 Blackout allow an easy and cost effective caliber conversion.

BCM Bravo Company 300 BLK

In the past few years we have seen many other companies  entering the 300 Blk market; we are very glad to see one of the best firearms manufacturer following the same steps. BCM will be offering the 300 Blackout upper receiver in 16″ RECCE, 12.5″ CQB and 10″ Pistol lengths.

300 Blackout SAAMI specs

Approved by SAAMI on 17 January, 2011, Supersonic 300 AAC Blackout 110-125 grain 300 Blackout ammunition was designed to produce a similar ballistic effect on target of a 7.62 x 39 mm round but out of a 9″ barreled AR platform carbine. At 300 meters, 300 Blackout has 16.7% more energy than a 7.62 x 39mm round. A supersonic round fired from a 9″ barreled AR pattern 300 Blackout carbine will match or exceed the energy at the muzzle of a 14.5″ 5.56 M4 carbine.

BCM Bravo Company 300 BLK

BCM 300 Blackout carbines use the exact same components, down to the magazines, as the rest of our carbine fleet with the exception of the barrels. This also means an end user can utilize both their existing magazines and AR accessories to fine tune the feel of their carbine, same as any other M4 or Recce rifle.

BCM Bravo Company 300 BLK

The 300 Blackout line of BCM carbines are built on our 1:7 Twist 11595E Certified Steel barrels. The bore on each BCM Enhanced Barrel is honed to perfect the rifled finish prior to chrome lining both bore and chamber. With a continuous taper profile designed to optimize balance, performance and weight; each BCM barrel is fluted toward the rear near chamber, increasing strength and speeding heat dissipation. Barrel harmonics and accuracy have been further improved by removing the sharp handguard cap shoulder commonly associated with AR platform barrels. Reliable, mil-spec quality, BCM Enhanced Barrels will deliver a repeated positive effect on target, every time you press the trigger.

01 BCM Bravo Company 300 BLK

For more information about the 300 Blackout caliber, its conversion and its performance (also at distance) please take a look at what Travis Haley from Haley Strategic Partners has to say after one year of test and evaluation with this platform.

SHOT2015 | New Products from MAGPUL

This year at SHOT Show Magpul has released some very interesting products.  The first segment is dedicated to the “marriage” between Uncle Sam and Mother Russia with the release of some new rifle furniture for AKs.

Magpul ZHUKOV-S Stock

ZHUKOV-S STOCK Magpul 2 The Magpul Zhukov-S Stock is a no-compromise folding stock for the modern AK. The Zhukov-S Stock casts aside traditional AK stock shortcomings and offers a folding, collapsible stock with QD sling mounts, modular Cheek Risers, and a shock-absorbing rubber butt-pad for superior traction. The Zhukov has right-side folding for compatibility with side-mounted optics. Designed to fit most common stamped AK receivers without modification via a unique wedge block, the durable injection molded polymer Zhukov-S Stock redefines the human interface with the AK platform. Magpul AK Folding ZHUKOV-S STOCK

Magpul MOE AK Stock

GetImage (8) Providing Magpul construction and ingenuity to the venerable AK platform, the Magpul MOE AK Stock is an optimized fixed stock for most stamped-receiver rifles. Featuring the unique wedge block fitment of the Zhukov-S Stock, the MOE AK Stock provides internal storage, optimized QD sling swivel placement, a shock absorbing rubber butt-pad for positive placement, and user-selectable snap on Cheek Risers.

Magpul PMAG D-60 AR/M4

GetImage The PMAG D-60 is a durable, lightweight, highly reliable 60-round 5.56×45 NATO/.223 Remington polymer magazine for AR15/M4 compatible weapons. With a larger capacity than previous PMAGs, the PMAG D-60 gives the shooter 60 rounds of ammunition, effectively allowing the same round count as two standard capacity 30-round magazines without requiring a critical reload. The unique drum configuration keeps the height of the magazine manageable as well, allowing prone firing and easier storage. Features a paint pen dot matrix for easy marking and a rear window for instant capacity indication. Compatible with a wide range of NATO firearms such as the M4, M16, SCAR MK16/16S, HK416, MR556, M27 IAR, and others. Magpul PMAG D-60 AR M4

Magpul PMAG GL9 – Glock 17

PMAG® 17 GL9, 9X19 – GLOCK® G17 The PMAG 17 GL9 is a 17-round magazine featuring durable polymer construction, paint pen dot-matrix for labeling, tool-less floor plate removal for ease of maintenance, and a visible capacity indicator hole on the body. The PMAG 17 GL9 is compatible with all full-size 9mm Glock handguns, as well as compact and sub-compact variants with some protrusion below the grip. PMAG® 17 GL9, 9X19 – GLOCK® G17

 Magpul HUNTER 700 Stock

MAGPUL HUNTER 700 STOCK Made from reinforced polymer and a machine finished, anodized A380 cast aluminum bedding block, the Magpul Remington 700 Hunter Stock offers users a fully adjustable length of pull, comb height, and enhanced ergonomics. Compatible with all Remington 700 Short Actions, this stock requires no bedding and is a true “drop-in” solution for the end user. This stock is also M-LOK compatible to accept a broad range of accessories. Also available is our Bolt Action Magazine Well, which allows the rifle to be used with detachable box magazines without the need for custom inletting. MAGPUL HUNTER 700 STOCK