Tag Archive | Weapons

Magpul | MLok Tripod Adapter

MAG624-Magpul Mlok Tripod Adapter

The M-LOK Tripod Adapter for metal M-LOK compatible hand guards or forends mounts directly onto any tripod head equipped with the common Manfrotto RC2/Q2 interface. This adapter allows the user to mount their rifle directly to a tripod head without the use of any additional saddles giving them a secure shooting platform.

MAG624-M-Lok-Tripod-Adapter-Mounted

The M-LOK Tripod Adapter is machined from aluminum and finished in Mil-Spec anodizing which offers excellent corrosion resistance. The beveled ends and corners produce a minimal footprint allowing the user to keep the M-LOK Tripod Adapter attached to the weapon system at all times with minimal snagging hazards.

Made in U.S.A.

MAG624-MLOK-Tripod-Adapter-Rifle-1

FEATURES

  • Compatible exclusively with Manfrotto products using RC2/Q2 rapid connect adapter
  • Directly mounts to metal M-LOK hand guards and forends (not intended for use with polymer hand guards or forends)
  • Cammed T-Nuts
  • Mil-Spec anodized aluminum
  • Compact and low profile, covers only two M-LOK slots
  • Beveled ends and corners
  • Recoil/impact mitigation lugs

MAG624-M-Lok-Tripod-Adapter-Close MAG624-MLOK-Tripod-Adapter

Haley Strategic releases FlatPack

The Haley Strategic Partners D3 FlatPack is an expandable compact assault pack. Designed with a unique expandable gusset system, the D3 FlatPack is an assault pack that can go from an almost flat profile when compressed to 600 cubic inches when completely expanded. It is Available in four different colors: Black, Coyote, Multicam and Ranger Green. Haley Strategic Partners HSP FlatPack Black Coyote Multicam Ranger Green 02 In its compressed state, the D3 FlatPack can run a 1 liter hydration bladder in the main compartment with additional small items like batteries, energy gels and chem lights stored in the dedicated admin chamber.  Expanded, the main compartment can fit a fully loaded D3CR, a helmet or a jacket while the admin can fit electronics and/or small binoculars. Haley Strategic Partners HSP FlatPack Black Coyote Multicam Ranger Green 04 The FlatPack integrates with a D3CR or D3CR-H, replacing the H harness with the pack straps, to create a light reconnaissance, patrol or an EDC worst case scenario rig. The FlatPack will also molle into any PALS based nylon system including plate carriers, assault vests or other packs with external PALs webbing. Haley Strategic Partners HSP FlatPack Black Coyote Multicam Ranger Green 05 Haley Strategic Partners HSP FlatPack Black Coyote Multicam Ranger Green 05 Although designed with the Special Operations end user in mind, the D3 FlatPack also makes an excellent everyday pack for civilians looking for a very compact carry bag that doesn’t scream military. Able to safely transport electronics such as the iPad, MacBook (12″) or any laptop or tablet up to 8″ x 12″, the padded inner chamber can also hold a number of items ranging from books and periodicals to digital cameras. Haley Strategic Partners HSP FlatPack Black Coyote Multicam Ranger Green 03 MacBook

The D3 FlatPack can hold the HSP D3CR making it a very compact and reliable pack to carry a chest rig in a covert situation. During the transition from covert to overt, one the D3CR is deployed, the operator is able to slim back down the pack and integrate it with the chest rig, making this system a great site exploitation bag. Haley Strategic Partners HSP FlatPack Black Coyote Multicam Ranger Green 06 haley strategic hasp flatpack flat pack Materials and Weight:
500D Cordura Mil-Spec nylon
16 ounces

Main Compartment:
200 cubic inches expandable to 600 cubic inches
Computers (max size 8″x 12″) will fit when fully compressed

Admin Compartment:
50 cubic inches that can also be expanded to 100 cubic inches

Integration:
With the HSP D3CR to create a patrol system
Any PALs based systems (such as plate carriers)

Berry Compliant:
Berry Amendment (10 U.S.C. 2533a) compliant as implemented by DFARS Haley Strategic Partners HSP FlatPack Black Coyote Multicam Ranger Green 09 Haley Strategic Partners HSP FlatPack Black Coyote Multicam Ranger Green 10 Haley Strategic Partners HSP FlatPack Black Coyote Multicam Ranger Green 08

Sig launches Sig Sauer Silencers

Every shooter should enjoy the hearing safety, reduced felt recoil and optimized overall experience of a silenced firearm, whether at the range or on a hunt. SIG SAUER is committed to making silencers accessible to more shooters by advancing silencer legislation and by increasing the affordability of silencers through smarter engineering and design.

Sig Sauer Silencers Introducing Taper-Lok™—a next-generation technology, exclusive to SIG SAUER Silencers. This innovative, three-piece system is built for speed, accuracy and repeatability over time.  Modular design allows for simple and economical changes to your muzzle configuration. Integrated wrench flats mean no ratchet teeth to wear out or damage. Provides the least zero-shift even through multiple install/removal cycles. Sig Sauer Silencers For each caliber Sig Sauer allows the operator to chose between the different attachment systems, materials and dimensions; making each and every suppressor suited for the job. Sig Sauer, as for now, provides the user six different caliber: 5.56, 7.62 and .338 LM, .22, 9 mm and .45 ACP. Sig Sauer Silencers

Rugged, 17-4 stainless steel baffles are enclosed by a titanium tube for leading durability and the lightest pistol silencers available. The interchangeable baffles allow for easy silencer assembly and maintenance. The most common standard and metric pistons are included in every box, allowing you to use the same silencer on a full arsenal of host pistols. Sig Sauer Silencers

Sig Sauer Silencers will be soon available for a very reasonable price. Maybe this time your wife won’t be so upset we she finds out how much you spent on your AR.

 

Kinetic Development Group | SCAR Adaptable Stock

The new Kinetic SAS kit takes the amazing Magpul designed Masada (ACR-E) stock system and allow for direct use with your SCAR platform rifle. Stock ships fully assembled with SCAR adapter for drop in use.

KDG-ACRdemo_09SMALL Just a few months ago, Kinetic Development Group launched its company with the promise to bring solutions to the small arms market existing with high quality firearms. They started with the FN SCAR as many SCARs are deployed with our Special Operations Forces. They also recognize the 16S and 17S are increasingly popular with American shooters and law enforcement.

KDG-ACR SCAR SAS

Their first products, the MREX (modular rail extensions) for the front end of the SCAR has been very popular. The KDG front and rear sling points have also brought the SCAR into the year 2015 as far as QD sling solutions go. Well, they have just addressed another common complaint about SCAR. Some refer to it as the SCAR’s “UGG Boot” like stock system.

KDG SAS kits come standard with 7 positions of length adjustment, cheek weld height adjustment, an AMBI QD sling attachment point, a weatherproof battery compartment, and a side-folding feature. Like the factory stock, the weapon can be fired with the stock folded. KDG also added an optional set-screw to allow users the option to eliminate any play between the stock and receiver.

KDG-ACRdemo_20SMALL

The stock and adapter comes fully assembled from KDG. There are no tools required to install on your SCAR! The whole system retails for $299.00 and can be purchased at www.kineticdg.com or a dealer listed near you found on their website.www.kinetidg.com/dealers

SHOT2015 | New Products from MAGPUL

This year at SHOT Show Magpul has released some very interesting products.  The first segment is dedicated to the “marriage” between Uncle Sam and Mother Russia with the release of some new rifle furniture for AKs.

Magpul ZHUKOV-S Stock

ZHUKOV-S STOCK Magpul 2 The Magpul Zhukov-S Stock is a no-compromise folding stock for the modern AK. The Zhukov-S Stock casts aside traditional AK stock shortcomings and offers a folding, collapsible stock with QD sling mounts, modular Cheek Risers, and a shock-absorbing rubber butt-pad for superior traction. The Zhukov has right-side folding for compatibility with side-mounted optics. Designed to fit most common stamped AK receivers without modification via a unique wedge block, the durable injection molded polymer Zhukov-S Stock redefines the human interface with the AK platform. Magpul AK Folding ZHUKOV-S STOCK

Magpul MOE AK Stock

GetImage (8) Providing Magpul construction and ingenuity to the venerable AK platform, the Magpul MOE AK Stock is an optimized fixed stock for most stamped-receiver rifles. Featuring the unique wedge block fitment of the Zhukov-S Stock, the MOE AK Stock provides internal storage, optimized QD sling swivel placement, a shock absorbing rubber butt-pad for positive placement, and user-selectable snap on Cheek Risers.

Magpul PMAG D-60 AR/M4

GetImage The PMAG D-60 is a durable, lightweight, highly reliable 60-round 5.56×45 NATO/.223 Remington polymer magazine for AR15/M4 compatible weapons. With a larger capacity than previous PMAGs, the PMAG D-60 gives the shooter 60 rounds of ammunition, effectively allowing the same round count as two standard capacity 30-round magazines without requiring a critical reload. The unique drum configuration keeps the height of the magazine manageable as well, allowing prone firing and easier storage. Features a paint pen dot matrix for easy marking and a rear window for instant capacity indication. Compatible with a wide range of NATO firearms such as the M4, M16, SCAR MK16/16S, HK416, MR556, M27 IAR, and others. Magpul PMAG D-60 AR M4

Magpul PMAG GL9 – Glock 17

PMAG® 17 GL9, 9X19 – GLOCK® G17 The PMAG 17 GL9 is a 17-round magazine featuring durable polymer construction, paint pen dot-matrix for labeling, tool-less floor plate removal for ease of maintenance, and a visible capacity indicator hole on the body. The PMAG 17 GL9 is compatible with all full-size 9mm Glock handguns, as well as compact and sub-compact variants with some protrusion below the grip. PMAG® 17 GL9, 9X19 – GLOCK® G17

 Magpul HUNTER 700 Stock

MAGPUL HUNTER 700 STOCK Made from reinforced polymer and a machine finished, anodized A380 cast aluminum bedding block, the Magpul Remington 700 Hunter Stock offers users a fully adjustable length of pull, comb height, and enhanced ergonomics. Compatible with all Remington 700 Short Actions, this stock requires no bedding and is a true “drop-in” solution for the end user. This stock is also M-LOK compatible to accept a broad range of accessories. Also available is our Bolt Action Magazine Well, which allows the rifle to be used with detachable box magazines without the need for custom inletting. MAGPUL HUNTER 700 STOCK

 

 

The Leupold D-EVO | Dual Enhanced View Optic

The D-EVO is a 6×20 fixed power prism optic which uses mirrors and lenses to get the job done. It could be used stand alone but it’s meant to be used in conjunction with a Red Dot Sight.

T1-DEVO-Combo (3)Developed over the last year, the Dual-Enhanced View Optic has many features being considered for the Army’s future Squad Common Optic. Leupold chose to integrate the Close Mid-Range Reticle with Wind holds (CMR-W) from the popular MK6 line (7.62 version below for illustration). It offers bullet drop to 600m as well as windage but this version uses averages for 5.56 and 7.62 cartridges. It offers up to 50 mils of windage and elevation adjustment with 0.1 mil increments per click of the dials.IMG_1055The D-EVO is 2″ tall, 4.6″ long, taking up only 3.2″ of rail space due to its mount. It weighs 13.8 oz and is waterproof to 66 feet.

Sight-Picture-LR The photo above is looking out at about 200m while the image below is at 100m. Sight-Picture

Credit: Leupold Optics, Soldier Systems

Haley Strategic Partners | The D3CR Heavy

Haley Strategic Partners has just released the Disruptive Environments Chest Rig Heavy. This new chest rig will allow a more mission specific set up for those who operate with a 308 platform while having the same slickness and low profile of an HSP soft good.

Haley Strategic Partners, HSP, D3CR-H, Disruptive Environments Chest Rig Heavy,  308

The D3CR-H addresses the same mission as the original D3CR, but has been slightly redesigned to support .308 platforms. Optimized for work in urban, vehicle, rural and other confined settings, the Disruptive Environment Chest Rig was built to be worn as a stand alone system with a detachable H-harness or clipped into a armor platform equipped with a quick release system.

Haley Strategic Partners, HSP, D3CR-H, Disruptive Environments Chest Rig Heavy,  308 (1)

When run as a stand alone, the platform is low profile enough to be worn fully loaded and not print on a normal/loose fit jacket or sweatshirt. When run on a armor platform with a quick release system, such as SwiftClips™, it can be attached or stowed in seconds, giving the end user the versatility to transition from low vis to high vis or vice versa.

Haley Strategic Partners, HSP, D3CR-H, Disruptive Environments Chest Rig Heavy,  308 (2)

The rig intentionally does not include a radio or dedicated full size medical pouch so no matter the posture, essentials such as communications and medical kits can remain on the end user at all times. The D3CR-H is also compatible with the Haley Strategic D3 Expansion System allowing the end user to add features including the holster wedge or multi-mission hanger pouch.

Haley Strategic Partners, HSP, D3CR-H, Disruptive Environments Chest Rig Heavy,  308 (3)

The rifle magazine pouches accept almost any .308 magazine. The Multi-Mission Pouches accept 1911, Glock, Sig, M&P, XD and other standard double or single stack pistol magazines, as well as many handheld lights and multi-tools.

Haley Strategic Partners, HSP, D3CR-H, Disruptive Environments Chest Rig Heavy,  308 (4)

The system features:

4 .308 Magazine Pouches with Hypalon® magazine retention tabs (Pouches support SR25, SCAR, FAL, AR10, M14, Lancer Systems, PMAG LR)

2 Multi-Mission Pouches with Hypalon magazine retention tabs (Fits standard double and single stack pistol magazines as well as other equipment including flashlights and multi-tools)

Zipper GP Pouch (Medical, compass, GPS, phone, batteries and other various small electronics)

Zipper Tool Pouch (Includes elastic keepers for more mission specific essentials, such as Kestrel wind meters, ballistic calculators, dope cards, batteries, tools and various electronics).

 

The D3CR-Heavy will be available in early December in Coyote and Multicam for $179.

 

 

Heckler & Koch introduces the new VP9 Striker Pistol

Image

The German brand has released some specifications of the new VP9 Srtiker Pistol. The handgun seems to be very user friendly. Read More…

Magpul M-LOK System

Image

Image

 

Image

HISTORY
In late 2007 Magpul Industries Corp developed the Masada Concept Rifle that featured a polymer hand guard with three elongated vent holes that acted as a negative mounting surface for accessory rails.

Image

These slots became one of the first “negative space” attachment systems that allowed the user to put mounting rails only where they were needed, as opposed to covering the entire surface with mounting rails, which are then covered with panels. The system also
allowed direct mounting of accessories, such as fore-grips and flashlights, with no rail interface needed.
In 2009 the MOE hand guards for the common AR15/M16 firearms were released, bringing the same slot system, along with rails, flash light mounts, grips and other accessories to the mainstream.
In the years since the MOE slot system has been released, several million MOE slot compatible accessories have been produced. Initially introduced as a Magpul-specific system, several other companies have built MOE slot compatible accessories in the years
since its release.
The MOE system was never officially released as an open standard, and the requirement to have access to the back side of the mounting surface limited its application.
Additionally, depending on the accessory item, the spacing increments were not always small or uniform enough for desired placement. These characteristics made MOE slots and accessories less ideal to use with free-float hand guards, which did not allow
back side access to the mounting surface. Rather than documenting and publishing the existing MOE slot information and weld nut system, Magpul engineers used this opportunity to substantially improve the feature set of the MOE system. The result is the M-LOK.

M-LOK
M-LOK stands for Modular Lock system. The M-LOK system retains an elongated slot appearance, similar to MOE slots (with different dimensions). The new slot is larger, has squared sides, and the new system adds the following feature set: M-LOK
• DIRECT MOUNT CAPABILITY
• CAMMED T-NUT
• OPTIMIZED FOR METAL AND POLYMER MANUFACTURING
• RECOIL/IMPACT MITIGATION LUGS
• INTERMEDIATE SPACING OPTION
• MULTI-DIRECTIONAL MOUNTING
• BACKWARDS MOE COMPATIBILITY

Image

FEATURES

DIRECT MOUNT CAPABILITY
Accessories are mountable directly from the front face of the slot. No access from the rear of the system is needed.

 

Image

 

CAMMED T-NUT
The M-LOK direct attachment system features a custom, cammed T-Nut that positions the T-Nut consistently for installation and removal. Simply adjust the gap between the T-Nut and accessory to match the thickness of the mounting surface, align the T-Nuts
with the slot, and insert in the desired location. An initial ¼ to ½ turn of the screw for each T-Nut rotates the nut into engagement and then you may tighten normally.

Image

OPTIMIZED FOR METAL AND POLYMER MANUFACTURING
Simple, rounded, rectangular slots with no sharp edges, complex geometry, or undercuts make the M-LOK slots optimal for high volume metal and polymer manufacturing

Image

The M-LOK slots require no special cutters or angle gauges in the manufacturing process. With injection molding, the lack of an undercut allows simple mold design. All of this results in the lowest manufacturing costs possible.

 

RECOIL/IMPACT MITIGATION LUGS
Accessories feature recoil mitigation lugs with full recoil lug support in all 4 axes of movement, preventing movement of the system under recoil or rough handling, allowing repeatable accuracy in removal and reinstallation.

Image

INTERMEDIATE SPACING OPTION
M-LOK accessories can be direct mounted entirely within a slot or bridging between/across slots, making the adjustment interval smaller than the size of a single slot. (Intervals equal two Picatinny rail slots (20mm) of adjustment). Full, 4 axis recoil lug support is maintained at every interval.

Image

MULTI-DIRECTIONAL MOUNTING
Accessories can be mounted facing toward the front or the rear (180 degrees difference), with full recoil lug support—the system does not need to be oriented in a specific direction to function properly.

Image

BACKWARDS MOE COMPATIBILITY
In addition to the soon-to-be released, dedicated M-LOK accessory line, current MOE accessories will work with the M-LOK slots via an adapter plate, giving the M-LOK system access to millions of accessories already fielded for the MOE system.

 

Image

 

IWA 2014 (Part 2) Smith&Wesson, Leupold, HK, Remington, B&T, Walther

Smith & Wesson:

ImageImageImageSmith & Wesson M&P9 C.O.R.E. Series  (9mm)

ImageImageImageSmith & Wesson M&P45 Full Size  (.45 ACP)

ImageImageSmith & Wesson M&P45    Full Size    Flat Dark Earth  (.45 ACP)

ImageImageImageImageImageSmith & Wesson BODYGUARD  (.380 AUTO)

ImageImageImageSmith & Wesson M&P Shield  (9mm)

ImageImageSmith & Wesson M&P Shield (9mm)  – Smith & Wesson BODYGUARD  (.380 AUTO)

ImageImageSmith & Wesson M&P 15  (.223 Rem)

ImageImageImageImageSmith & Wesson M&P10  (.223 Rem)

ImageImage Smith & Wesson M&P 15-22 (.22LR)

Website: www.smith-wesson.com/

Leupold:

ImageImageLeupold MARK 4 H.A.M.R. Rifle Scope

ImageLeupold VX-R Patrol

ImageLeupold MARK 6 M6C1

ImageWebsite: www.leupold.com/

Tanfoglio:

Image Website: www.tanfoglio.itImage

Brüger & Thomet:

ImageImageImageImageB&T APR308  (.308 Win)

ImageB&T TP9 / MP9  (9mm)

Website: www.bt-ag.ch

Heckler & Koch:

ImageHK MR308 (.308 Win)

ImageHK MR308 (.308 Win) – HK USC (.45 ACP)

ImageImage HK MR223 (.223 Rem)

ImageHK MR223 Flat Dark Earth (.223 Rem)

ImageImageHK USP (9mm)

ImageImageHK 45 (.45 ACP)

ImageHK P8 A1 (9mm)

ImageImageHK P2000 (9mm)

ImageImageHK 243S SAR (.223 Rem)

Website: www.heckler-koch.com/

Walther:

ImageImageWalther PK380

Website: www.waltherarms.com/

Remington:

ImageRemington 870 Express Tactical Magpul Flat Dark Earth  (12 Gauge)

ImageRemington M700 Tactical Chassis  (.300 Win Mag – .308 Win – .338 Lapua Magnum)

ImageImageRemington Para Expert Stainless   (.45 ACP)

ImageImageRemington Para Expert Carry  (.45 ACP)

Website: www.remington.com